We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular sensor module with plastic housing and metal contacts

YINGHUA

YINGHUA Pinchwheel Lifter Sensor Q5669-60706 Printhead

SKU CH-QREG-TPV12

Pinchwheel lifter sensor Q5669-60706 for HP DesignJet T610, T620, T770, T1120, T1200, T2300, Z5200 and T7100 large-format printers

  • Product TypePrinthead
  • Pinchwheel lifter sensor ensures reliable paper handling for DesignJet printers
  • Direct replacement part Q5669-60706 restores original printer function
  • Compatible with 24-inch and 44-inch DesignJet models including T610 T620 T770 T1120 T1200 T2300 Z5200 T7100
  • New condition guarantees clean installation without prior wear

Pinchwheel Lifter Sensor Q5669-60706

This genuine replacement sensor is designed for HP DesignJet large-format printers. It restores accurate media handling on models including the T610, T620, T770, T1120, T1200, T2300, Z5200 and T7100 across both 24-inch and 44-inch widths. Print shops and technical service teams use it to resolve paper feed errors caused by a worn or faulty original unit.

Straightforward printhead-area installation

The sensor mounts inside the printhead carriage assembly using the existing fixing points, requiring only basic hand tools. Careful routing of the flexible cable prevents pinching when the carriage moves. A common issue is forgetting to reset the printer’s media calibration after fitting the new part, which leaves the lifter position misaligned and causes recurring jam alerts.

Highlights

  • Pinchwheel lifter sensor ensures reliable paper handling for DesignJet printers
  • Direct replacement part Q5669-60706 restores original printer function
  • Compatible with 24-inch and 44-inch DesignJet models including T610 T620 T770 T1120 T1200 T2300 Z5200 T7100
  • New condition guarantees clean installation without prior wear

Specifications

Product TypePrinthead

Questions about this item

How can I verify the Pinchwheel Lifter Sensor Q5669-60706 is functioning correctly after installing it in my DesignJet T770?

After installation, run a test print on the DesignJet T770. The pinch wheels should lift and lower smoothly during media loading and printing without error codes appearing on the printer control panel.

What components are included with the Q5669-60706 sensor and what additional parts are needed for installation?

The box contains the Pinchwheel Lifter Sensor Q5669-60706 only. No mounting screws, cables, or tools are included; reuse existing hardware from the DesignJet T610, T2300, or other compatible model during replacement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.