We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey aluminium M.2 SSD enclosure with sliding cover

YINGHUA

YINGHUA M.2 SSD Enclosure SATA 3.0 NVMe Grey 2230 2242 2260 2280

SKU CH-N6YV-2D0NR

Tool-free M.2 enclosure supports SATA and NVMe drives in 2230 to 2280 sizes with automatic sleep after 10 minutes

  • Automatic sleep after 10 minutes cuts heat and extends drive life
  • Tool-free design lets you swap drives in seconds without screws
  • USB 3.1 Gen2 interface delivers up to 10Gbps theoretical transfer speeds
  • SATA 3.0 support provides 6Gbps theoretical read performance
  • Aluminium-alloy body conducts heat away from 2230 2242 2260 2280 NVMe and SATA drives

External M.2 SATA and NVMe Enclosure

This aluminium enclosure turns a 2230 2242 2260 or 2280 M.2 drive into a portable USB device. It accepts both SATA and NVMe modules so one case covers the two common interfaces. Tool-free installation lets you swap drives without screws or tools. The grey finish matches most laptops and desktops.

USB 3.1 Gen 2 10 Gbps interface limit

The enclosure connects through USB 3.1 Gen 2 with a theoretical ceiling of 10 Gbps. SATA 3.0 drives are capped at their native 6 Gbps link speed so they cannot reach the USB maximum. NVMe drives may hit higher throughput but remain bounded by the 10 Gbps USB pipe. Automatic sleep activates after 10 minutes of inactivity to cut heat and power draw.

Single-protocol-per-drive constraint

Each installed M.2 module operates in either SATA or NVMe mode depending on its own controller. The enclosure does not convert a SATA drive to NVMe or vice versa. Buyers who need simultaneous dual-drive access or protocol conversion must choose a different solution.

Highlights

  • Automatic sleep after 10 minutes cuts heat and extends drive life
  • Tool-free design lets you swap drives in seconds without screws
  • USB 3.1 Gen2 interface delivers up to 10Gbps theoretical transfer speeds
  • SATA 3.0 support provides 6Gbps theoretical read performance
  • Aluminium-alloy body conducts heat away from 2230 2242 2260 2280 NVMe and SATA drives

Specifications

No published specifications for this item yet.

Questions about this item

Which M.2 form factor should I choose for this enclosure?

The enclosure accepts 2230, 2242, 2260 and 2280 modules, so match the length printed on your SSD to one of those four sizes.

What does the 10 Gbps USB 3.1 Gen2 rating mean for actual transfer speed?

It sets the interface ceiling at 10 Gbps; real-world throughput will be lower and also limited by whether the installed drive uses SATA 3.0 at 6 Gbps or NVMe.

How does the SATA 3.0 6 Gbps limit affect an NVMe drive in this case?

An NVMe drive will operate, but its maximum throughput is capped at the SATA 3.0 6 Gbps interface speed rather than its native PCIe potential.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.