YINGHUA
YINGHUA M.2 SATA NVME Dual-Bay USB 3.1 Type-C Enclosure Gray 113x76x16mm
Holds two M.2 SATA or NVME drives with USB 3.1 Type-C in a 113x76x16 mm aluminium case
- Dual-bay design fits two M.2 drives
- USB 3.1 Type-C delivers fast transfers
- Aluminium alloy body aids heat dissipation
- Compact 113x76x16mm form slips into bags
- Supports SATA and NVME protocols together
Dual-Bay M.2 SATA and NVME Enclosure
The YINGHUA enclosure holds two M.2 drives at once, supporting SATA and NVME protocols in a single aluminium-alloy case. Its grey finish and 113x76x16mm footprint make it a compact, portable option for desktop users who need quick external access to solid-state storage. The USB 3.1 Type-C connection carries both data and power for the installed modules.
Verify Drive Protocol and Length Before Ordering
Confirm each drive is an M.2 SATA or NVME module; the two bays accept different protocol combinations depending on the specific variant you receive. Check that your host device provides a USB Type-C port running at USB 3.1 speeds to match the enclosure interface. No driver installation is mentioned, so the host operating system must support native UASP or mass-storage class operation.
Fits Between Drives and Host Without Extra Cabling
The enclosure draws power directly from the USB 3.1 Type-C link, so no external adapter is required and a desktop port is freed for other peripherals. Aluminium construction acts as a passive heatsink for both drives during sustained transfers. Two bays let you clone, migrate or expand storage while keeping a single cable connection to the computer.
Highlights
- Dual-bay design fits two M.2 drives
- USB 3.1 Type-C delivers fast transfers
- Aluminium alloy body aids heat dissipation
- Compact 113x76x16mm form slips into bags
- Supports SATA and NVME protocols together
Specifications
No published specifications for this item yet.
Questions about this item
What drives fit the two M.2 slots in this gray aluminium case?
Depending on the version you choose, the enclosure accepts two M.2 SATA drives, two M.2 NVME drives, or one of each in the NVME+SATA model.
Which version should I pick for a single NVME stick and one SATA stick?
Select the NVME+SATA variant; it provides one M.2 NVME slot and one M.2 SATA slot in the same 113x76x16 mm housing.
What real-world throughput will I see over the USB 3.1 Type-C port?
The USB 3.1 Gen 1 link tops out at 5 Gbps, so sequential reads and writes from either SATA or NVME drives will be limited to that bandwidth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



