We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with Type-C port and M.2 slot for NVME drives

YINGHUA

YINGHUA M.2 NVME SSD Converter Gen2 10Gbps Type-C USB 3.1 JMS581 1000MB/s 2230-2280

SKU CH-KXFJ-T4ZFC

Connects M.2 NVME drives in 2230, 2242, 2260 or 2280 sizes to USB 3.1 Type-C at up to 1000 MB/s via JMS581 controller

  • Works with 2230 to 2280 M.2 drives
  • JMS581 controller delivers stable 1000 MB/s reads
  • USB 3.1 Gen2 Type-C reaches 10 Gbps
  • Compact 49 x 22 mm board fits tight spaces
  • Plug-and-play NVME adapter needs no drivers

YINGHUA M.2 NVME SSD Converter Gen2

This adapter turns an M.2 NVME drive into a portable USB device using a Type-C connection. It accepts drive lengths of 2230, 2242, 2260 and 2280 within a compact 49 x 22 mm circuit board. The JMS581 controller manages the link between the drive and the host port.

Suits users adding external NVME storage

The converter works with drives that use the NVME protocol and the listed M.2 lengths. It does not support drives longer than 2280 or drives that require a different interface protocol. Builders needing internal mounting or a different host connector should look at other options.

10 Gbps USB 3.1 Type-C interface

The USB 3.1 Gen2 Type-C port delivers up to 1000 MB/s transfer speed when paired with a compatible NVME drive and host controller. Actual throughput depends on the specific drive performance and the host system capabilities. This single interface specification determines whether the adapter matches the required workflow.

Highlights

  • Works with 2230 to 2280 M.2 drives
  • JMS581 controller delivers stable 1000 MB/s reads
  • USB 3.1 Gen2 Type-C reaches 10 Gbps
  • Compact 49 x 22 mm board fits tight spaces
  • Plug-and-play NVME adapter needs no drivers

Specifications

No published specifications for this item yet.

Questions about this item

Does the converter come with an M.2 NVME SSD or do I need to supply my own 2230, 2242, 2260 or 2280 drive?

The adapter is sold without a drive; you must provide your own M.2 NVME SSD in any of the supported 2230, 2242, 2260 or 2280 form factors.

Which of the supported lengths — 2230, 2242, 2260 or 2280 — should I choose for my SSD?

Pick the length that matches the SSD you already own or plan to buy; the 49 x 22 mm board accepts all four sizes so any will fit.

What does the 1000 MB/s headline speed mean when I connect the adapter to a USB 3.1 Type-C port?

It is the maximum sequential transfer rate the JMS581 controller can deliver over the 10 Gbps USB 3.1 link when paired with a compatible NVME drive.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.