We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten small plastic ink dampers with filter mesh and threaded connectors

YINGHUA

YINGHUA DX4 DX5 Printhead Small Ink Damper 10pcs

SKU CH-EQAQ-NEHCT

Pack of 10 small ink dampers with integrated filter and nut fits DX4 and DX5 printheads on Roland SP540, Mutoh RJ900, Mimaki JV3 and Epson R1800, R1900 and 1390 printers

  • Product TypeReplacement Parts
  • 10 dampers per pack for multiple printhead maintenance
  • Large filter area prevents clogging and extends nozzle life
  • PE construction resists corrosion from solvent and water-based inks
  • Compatible with Roland SP540 Mutoh RJ900 Mimaki JV3 printers
  • Small 3*2 connector fits DX4 and DX5 printheads

Compatible Printer Models

This pack contains ten small ink dampers sized for DX4 and DX5 printheads. They fit Roland SP540, Mutoh RJ900, Mimaki JV3 and JV4 series, plus Epson R1800, R1900 and 1390 wide-format printers.

Use Case Guidance

Print shops running eco-solvent, dye, pigment or thermal-transfer inks on the listed machines will benefit from the large-area filter that resists clogging. Operators of printers not named above, or those needing a different connector size, should source the correct part for their hardware.

Connector Specification

Each damper uses a 3 by 2 small connector and is moulded from PE material for chemical resistance. The filter structure is designed for compatible-ink environments and aims to extend nozzle life by maintaining steady ink flow.

Highlights

  • 10 dampers per pack for multiple printhead maintenance
  • Large filter area prevents clogging and extends nozzle life
  • PE construction resists corrosion from solvent and water-based inks
  • Compatible with Roland SP540 Mutoh RJ900 Mimaki JV3 printers
  • Small 3*2 connector fits DX4 and DX5 printheads

Specifications

Product TypeReplacement Parts

Questions about this item

What size connector does the small ink damper use?

The damper uses a 3*2 small connector for the DX4 and DX5 printheads.

How do you install the damper and nut on the printhead?

Push the damper onto the printhead inlet and tighten the included nut by hand; overtightening the nut is the step most people get wrong.

When should the ink damper be replaced?

Replace the damper when the filter becomes clogged, ink flow is restricted, or after extended use with solvent or pigment inks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.