We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 24 inch ribbon cable with multiple connectors

YINGHUA

YINGHUA Carriage Trailing Cable 24IN Printhead DesignJet Z3200 Z3100ps T1100 T610 Z2100 500 Plus

SKU CH-338A-D4QV5

A 24-inch carriage trailing cable designed for HP DesignJet Z3200, Z3100ps, T1100, T610, Z2100 and 500 Plus printers

  • Product TypePrinthead
  • Ensures reliable printhead movement with 24-inch trailing cable
  • Compatible with DesignJet Z3200 and Z3100ps models
  • Supports T1100 and T610 series printers
  • Fits Z2100 and 500 Plus devices for broad compatibility

Replacement Cable for DesignJet Plotters

This 24-inch carriage trailing cable is a new printer supply manufactured by YINGHUA. It serves as a direct replacement for the flexible ribbon that connects the moving printhead carriage to the main electronics in compatible HP DesignJet large-format printers. The part restores the electrical continuity required for precise ink placement during wide-format output.

For HP DesignJet Z and T Series Owners

The cable fits DesignJet models including the Z3200, Z3100ps, Z2100, T1100, T610 and the 500 Plus series. It is not suitable for printers outside this listed compatibility range, nor for users requiring a different cable length or connector configuration. Buyers needing service parts for other plotter families should verify their specific service manual before ordering.

Highlights

  • Ensures reliable printhead movement with 24-inch trailing cable
  • Compatible with DesignJet Z3200 and Z3100ps models
  • Supports T1100 and T610 series printers
  • Fits Z2100 and 500 Plus devices for broad compatibility

Specifications

Product TypePrinthead

Questions about this item

How is the 24-inch carriage trailing cable installed on the DesignJet Z3200, and what step is often missed?

Power off the printer, open the carriage cover, disconnect the old cable from the printhead board, route the new 24-inch cable along the carriage track, and secure both connectors; the step often missed is latching the strain-relief clip on the printhead side.

What maintenance or replacement will the 24-inch trailing cable need later on the DesignJet T1100?

Inspect the cable every six months for wear at the flex points; replace it if the insulation cracks or the conductors show fatigue, typically after two to three years of heavy use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.