YINGHUA
YINGHUA 8X42X80MM Two Flutes UP DOWN Spiral Carbide Mill Cutter
An 8 mm tungsten-steel compression cutter with up-and-down flutes for clean CNC cuts in wood and PVC
- TypeRight-Angle Drills
- Two-flute up/down spiral gives clean top and bottom edges on wood and PVC
- Tungsten steel construction resists wear for longer tool life in CNC routing
- 8 mm shank fits standard collets for quick tool changes
- 42 mm cutting length handles thick panel stock in a single pass
- 80 mm overall length provides reach for deep pockets and through-cuts
8 mm Two-Flute Compression Cutter
This 8 mm diameter carbide end mill has a 42 mm cutting length and 80 mm overall length. Its two-flute up-and-down spiral geometry shears the top and bottom faces of the workpiece at the same time. The tool is designed for CNC routing of wood, plywood, density board, solid wood and particleboard.
Single-Piece Carbide Tooling Limit
Supplied as one independent cutter, the bit offers no spare or matched pair for continuous production runs. Tungsten steel construction resists wear but remains brittle, so heavy interrupted cuts or improper feed rates can fracture the flutes. The right-angle drill form factor restricts use to machines that accept that shank style.
18-Year Age Restriction
Safety instructions explicitly forbid use by anyone under 18 years old, making this cutter unsuitable for educational workshops or hobbyists below that age. Industrial cutting-only labelling also means it is not approved for hazardous-material machining. Buyers who need a tool cleared for younger operators or non-industrial environments must choose a different product.
Highlights
- Two-flute up/down spiral gives clean top and bottom edges on wood and PVC
- Tungsten steel construction resists wear for longer tool life in CNC routing
- 8 mm shank fits standard collets for quick tool changes
- 42 mm cutting length handles thick panel stock in a single pass
- 80 mm overall length provides reach for deep pockets and through-cuts
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Should I choose the 8 mm, 42 mm or 80 mm version for my CNC work?
This cutter is a single 8 mm diameter tool with a 42 mm cutting length and 80 mm overall length; no other diameters or lengths are offered.
What does the 42 mm cutting length mean when the bit is in my spindle?
It gives you up to 42 mm of usable flute engagement for through-cuts or deep pockets in wood, plywood, density board, solid wood or particleboard.
How does the up-cut and down-cut spiral geometry affect chip flow on a right-angle drill?
The opposing helices compress the workpiece from both sides, reducing tear-out on top and bottom surfaces while evacuating chips through the flutes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
