YINGHUA
YINGHUA 6x6x22x50 Two Flute Colorful Coated Carbide End Mill
Two-flute tungsten-steel end mill with a colourful coating cuts wood, acrylic and plastics on CNC routers; 6 mm shank, 22 mm flute, 50 mm overall
- TypeRight-Angle Drills
- Two-flute design enables smooth chip evacuation during engraving
- Colorful coating reduces friction and heat buildup on cuts
- Tungsten steel construction resists wear across repeated operations
- Cuts acrylic, PVC, nylon, resin, wood and plywood cleanly
- 6 mm shank, 22 mm flute length and 50 mm overall length fit CNC collets
YINGHUA 6x6x22x50 Carbide End Mill
This single-flute carbide end mill is built for CNC engraving and cutting. Tungsten steel construction provides hardness for precise profiling in wood, plywood, acrylic, PVC, nylon and resin. The colourful coating helps reduce friction and extends tool life during repeated passes. It suits hobbyists and small-shop operators running desktop or benchtop routers.
Target Users and Limitations
The cutter suits users who need a single replacement tool for fine detail work in non-ferrous materials. Buyers who require multi-pack quantities for production runs should look elsewhere. Shops cutting ferrous metals or hardened steels need a different geometry and coating. The 18-year age restriction also limits use to adult operators in industrial settings.
22 mm Cutting Length and 50 mm Overall Length
These two dimensions determine whether the tool reaches the required depth and fits the machine spindle clearance. Verify that 22 mm of flute length covers your maximum cut depth and that 50 mm overall length matches your tool holder specification before ordering.
Highlights
- Two-flute design enables smooth chip evacuation during engraving
- Colorful coating reduces friction and heat buildup on cuts
- Tungsten steel construction resists wear across repeated operations
- Cuts acrylic, PVC, nylon, resin, wood and plywood cleanly
- 6 mm shank, 22 mm flute length and 50 mm overall length fit CNC collets
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How do I install the 6 mm shank end mill in my CNC collet without damaging the 22 mm flute length?
Insert the 6 mm shank fully into the ER collet, tighten the collet nut to the machine's specified torque, and verify the 22 mm flute clears the workpiece before starting the spindle.
When will the colorful coating on this tungsten steel cutter need replacement?
The coating wears gradually; replace the cutter when edge quality drops on acrylic, PVC, nylon, resin, wood, or plywood, typically after extended CNC engraving runs.
What limit appears first during a long engraving job in hardwood with this 50 mm overall length tool?
Heat buildup in the two-flute carbide body is the first limit; reduce feed or use air blast to prevent premature edge breakdown during sustained cuts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
