YINGHUA
YINGHUA 6X32X60MM BlueNano Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutters
A 6 mm tungsten-steel compression router bit with up-cut and down-cut flutes for clean edges in wood and PVC
- TypeRight-Angle Drills
- Precise compression cuts in wood and PVC backed by up-and-down flute geometry
- Long-lasting sharpness from tungsten-steel construction
- Clean edges on plywood, density board and particleboard without tear-out
- Single-piece independent packaging keeps the cutter protected until use
- Industrial-grade design rated for users aged 18 and above
6×32×60 mm BlueNano two-flute compression cutter
This solid-carbide milling cutter has a 6 mm shank, 32 mm cutting length and 60 mm overall length. The up-cut and down-cut geometry compresses the workpiece faces for clean edges in wood, plywood, particleboard and similar sheet goods. One piece ships in its own package, ready for CNC routers and similar machines.
Suited to CNC operators cutting double-faced panels
The compression profile prevents tear-out on both surfaces, making it useful for cabinet parts, sign blanks and furniture components. Buyers needing a single-flute tool for chip clearance in plastics or a longer reach for deep pockets should look elsewhere.
32 mm cutting length sets maximum depth of cut
This dimension determines how deep you can plunge or profile in a single pass without multiple step-downs. Verify your machine travel and material thickness against the 32 mm figure before ordering.
Highlights
- Precise compression cuts in wood and PVC backed by up-and-down flute geometry
- Long-lasting sharpness from tungsten-steel construction
- Clean edges on plywood, density board and particleboard without tear-out
- Single-piece independent packaging keeps the cutter protected until use
- Industrial-grade design rated for users aged 18 and above
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How do I know the 6 mm shank end mill is cutting cleanly after I install it?
Check that the up-and-down flutes leave a smooth edge on both faces of the wood or PVC without tear-out, and listen for steady, low-vibration operation.
What comes in the single independent package and what must I supply?
The box contains one 6X32X60 mm BlueNano up-and-down carbide cutter; you must provide a compatible CNC collet or router chuck and suitable dust extraction.
Which size should I choose for general wood and PVC compression cuts?
The 6 mm shank with 32 mm cutting length and 60 mm overall length is the only version listed and suits typical CNC compression routing tasks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
