YINGHUA
YINGHUA 6X25X50MM Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutter Bits
A single 6 mm shank carbide compression bit with 25 mm cut length and 50 mm overall length cuts wood, plywood and particleboard cleanly on CNC routers
- TypeRight-Angle Drills
- Tungsten steel construction resists wear during heavy routing
- Up-and-down spiral geometry compresses chips for clean edges
- Two-flute design clears debris quickly in wood and PVC
- Suitable for plywood, particleboard and solid wood cutting
- Industrial-grade cutter rated for users aged 18 and over
YINGHUA Carbide Mill Cutter 6X25X50MM
This single carbide milling cutter is built for CNC machinery and delivers precise cutting in wood, plywood, density board, solid wood and particleboard. The tungsten steel construction provides durability for industrial routing tasks. The up-and-down spiral flute geometry produces clean edges on both faces of the workpiece. It is sold as one piece in an independent package.
For CNC operators routing wood and PVC
Suitable for users who need a compression spiral bit for through-cuts in sheet goods and solid timber. The 18-year age restriction and industrial-only designation mean it is not for hobbyists under 18 or for general DIY drilling. Buyers requiring multiple cutters or different diameters should look elsewhere.
25 mm cutting length with 50 mm overall
Comfortably handles full-depth passes in standard sheet materials up to the flute length. The single-flute-per-direction design limits chip evacuation speed in very dense or abrasive composites. Extended production runs in hard particleboard may dull the edges faster than multi-flute alternatives.
Highlights
- Tungsten steel construction resists wear during heavy routing
- Up-and-down spiral geometry compresses chips for clean edges
- Two-flute design clears debris quickly in wood and PVC
- Suitable for plywood, particleboard and solid wood cutting
- Industrial-grade cutter rated for users aged 18 and over
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What shank diameter must my CNC collet or router chuck accept for this 6 mm cutter?
The cutter has a 6 mm shank, so your collet or chuck must grip a 6 mm diameter.
Will the up-and-down flute geometry cut cleanly in the plywood and density board I already machine?
Yes, the compression design shears fibres both upward and downward, giving clean edges on plywood, density board, solid wood and particleboard.
How can I verify the bit is cutting correctly after the first pass?
Inspect the top and bottom faces of the workpiece; both should show clean, tear-free edges with no splintering.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
