YINGHUA
YINGHUA 6x25x50mm Two-Flute Up/Down Spiral Carbide Mill Cutter Set (5 pcs)
Five carbide end mills with up-cut and down-cut flutes cut wood, plywood, particleboard and PVC cleanly in CNC machines
- TypeRight-Angle Drills
- Five cutters included for ready-to-use milling
- Tungsten steel construction for long cutting life
- Up/down spiral geometry reduces tear-out on wood and PVC
- 6 mm shank with 25 mm flute and 50 mm overall length
- Suitable for wood, plywood, density board, solid wood and particleboard
6x25x50 mm 2-Flute Up/Down Carbide Cutters
This five-piece set contains 6 mm shank carbide mill cutters with a 25 mm cutting length and 50 mm overall length. The two-flute up/down spiral geometry compresses the workpiece from both sides for clean edges on top and bottom surfaces. Tungsten steel construction gives the hardness needed for repeated CNC routing passes. Each cutter is individually packaged for protection.
Wood, plywood and density board routing — not
The cutters are specified for wood, plywood, density board, solid wood and particleboard. They suit CNC operators and woodworkers who need compression cutting on sheet goods. The tools are not intended for ferrous or non-ferrous metals, plastics other than PVC, or abrasive composites. Buyers who need metal-cutting geometry or larger diameters should look at a different cutter range.
6 mm shank with 25 mm cutting length
The 6 mm shank fits standard 6 mm collets on hobby and light-industrial CNC routers. A 25 mm cutting depth limits the maximum material thickness in a single pass. The up/down spiral action reduces tear-out on double-sided laminates. Verify that your machine accepts 6 mm shanks and that the 25 mm flute length matches your job requirements.
Highlights
- Five cutters included for ready-to-use milling
- Tungsten steel construction for long cutting life
- Up/down spiral geometry reduces tear-out on wood and PVC
- 6 mm shank with 25 mm flute and 50 mm overall length
- Suitable for wood, plywood, density board, solid wood and particleboard
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How often will the tungsten steel cutters need replacing when cutting wood and plywood?
Tungsten steel cutters stay sharp longer than high-speed steel, but replacement depends on feed rate, material density and total cutting time rather than a fixed interval.
What stops a 25 mm cutting depth pass in solid wood before the tool fails?
The 25 mm flute length limits how deep each pass can go; pushing deeper risks tool deflection and breakage.
How much heat builds up in the 6 mm shank during an all-day CNC run?
Carbide conducts heat well, yet continuous cutting in dense board will warm the shank; use coolant or air blast to keep temperatures manageable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
