YINGHUA
YINGHUA 6X22X50MM DLC Coat Two Flutes UP DOWN Cut Spiral Carbide Mill Cutter Bit
A 6 mm shank carbide compression bit with DLC coating cuts wood and PVC cleanly in both directions
- TypeRight-Angle Drills
- DLC coating extends tool life on abrasive materials
- Up-down spiral compresses chips for clean edges on wood and PVC
- Two-flute carbide geometry balances chip clearance with cutting strength
- Tungsten steel body resists wear in plywood, density board and particleboard
- 6 mm shank, 22 mm cutting length, 50 mm overall fits standard CNC collets
YINGHUA 6X22X50MM DLC Coat Router Bit
This carbide milling cutter is built for CNC machinery and suits woodworkers cutting solid wood, plywood, particleboard and density board. The DLC coating and two-flute up-and-down spiral geometry are designed to give a clean finish on both faces of the workpiece. Industrial users who need precise profiling or compression cuts on composite panels will find it compatible with standard collet systems. It is not intended for metal, stone, glass or any non-wood material.
Capacity: 22 mm Cut Length, 50 mm Overall
The 22 mm cutting length handles typical panel thicknesses and deep profiling passes in a single plunge, while the 50 mm overall length fits most compact CNC spindles and router collets. Headroom runs out when material exceeds the flute reach or when heavy hogging demands more chip clearance than two flutes provide; very thick hardwood slabs or high-volume production may require longer or multi-flute tooling instead.
Critical Spec: Tungsten Steel with DLC Coating
The cutter is made from tungsten steel with a diamond-like carbon coating that reduces friction and extends edge life in abrasive wood composites. This material-and-coating combination is the single factor that determines whether the bit survives your workload; if your application involves ferrous metals, high-heat plastics or continuous dry cutting without dust extraction, this specification will not meet the requirement.
Highlights
- DLC coating extends tool life on abrasive materials
- Up-down spiral compresses chips for clean edges on wood and PVC
- Two-flute carbide geometry balances chip clearance with cutting strength
- Tungsten steel body resists wear in plywood, density board and particleboard
- 6 mm shank, 22 mm cutting length, 50 mm overall fits standard CNC collets
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Will the 6 mm shank fit my older CNC collet?
The cutter has a 6 mm shank diameter, so it fits standard 6 mm ER collets used on many hobby and light-industrial CNC routers.
How can I confirm the up-cut and down-cut flutes are cutting cleanly?
Run a test pass in scrap plywood; a clean top and bottom edge with no tear-out shows the two-flute compression geometry is working.
Does the single-piece pack include any collets or adapters?
The package contains only one 6×22×50 mm DLC-coated carbide cutter; collets, tool holders or wrenches must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
