YINGHUA
YINGHUA 6X22X50mm Blue 3A UP DOWN Compound Single Flute Spiral Carbide Mill Tool Cutter
6 mm shank carbide router bit with 22 mm cutting length and 50 mm overall length for compression cuts in wood, acrylic and PVC
- TypeRight-Angle Drills
- 6 mm shank fits standard CNC collets
- 22 mm flute length gives deep cutting reach
- 50 mm overall length suits compact routers
- Up-down spiral compresses top and bottom surfaces
- Single flute clears chips fast in wood and plastic
YINGHUA Compression Router Bit
This single-flute carbide cutter is designed for CNC machinery and delivers clean compression cuts in acrylic, PVC, density board and wood. The up-down geometry reduces tear-out on both faces of the workpiece. It is supplied as one piece for immediate workshop use. Suitable for operators aged 18 and over in industrial cutting applications.
6 mm Shank with 22 mm Cutting Length
The 6 mm shank fits standard collets while the 22 mm flute length determines the maximum depth of cut in a single pass. This dimension is the critical specification for matching the tool to your material thickness and machine clearance. No other shank or flute sizes are offered for this model.
50 mm Overall Length Defines Reach
The 50 mm total length sets the tool's projection from the collet, limiting how deep it can reach into a fixture or thick stock. It comfortably handles sheet goods up to the flute length but runs out of engagement beyond that depth. Builders needing longer reach or multi-flute chip evacuation must select a different cutter.
Highlights
- 6 mm shank fits standard CNC collets
- 22 mm flute length gives deep cutting reach
- 50 mm overall length suits compact routers
- Up-down spiral compresses top and bottom surfaces
- Single flute clears chips fast in wood and plastic
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What does the 6 mm shank diameter mean when I install this cutter in my CNC machine?
The 6 mm shank is the part that clamps into your collet or tool holder; it determines which collet size you need and ensures the cutter runs concentric with the spindle.
How does the up-down spiral geometry affect the cut on a 22 mm flute length?
The opposing helix directions pull chips both up and down, compressing the material and giving clean edges on both faces of 22 mm deep cuts in wood, acrylic or PVC.
What clearance do I need for the 50 mm overall length when mounting this bit?
The 50 mm total length requires at least that much Z-axis travel plus collet engagement, so check your machine's maximum tool length and work-holding height before cutting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
