YINGHUA
YINGHUA 6X22X50mm 3A UP DOWN Compound Single Flute Spiral Carbide Mill Tool Cutters
Carbide compression router bit with single up-down flute cuts acrylic, PVC, density board and wood on CNC machinery
- TypeRight-Angle Drills
- Up/down spiral compresses wood fibres for clean edges
- Single flute clears chips fast in acrylic and PVC
- Tungsten steel body keeps sharpness through dense board
- 6 mm shank fits standard CNC collets directly
- 22 mm cutting length handles 50 mm overall depth
YINGHUA 6X22X50mm Carbide Mill Cutter
The YINGHUA 6X22X50mm carbide mill cutter is a single-flute spiral tool designed for compression cutting on CNC machinery. It targets operators who need precise profiling on wood, density board, acrylic and PVC sheets. The up-down compound geometry helps reduce tear-out on both faces of the workpiece during through cuts.
Right-Angle Drill Interface Limits
This cutter fits right-angle drill holders with a 6 mm shank, so it cannot be used in standard collets or routers that require larger diameters. The single-flute design limits chip evacuation speed compared to multi-flute tools, making aggressive feed rates impractical in dense materials. The 18-year age restriction also confines purchase and use to adult operators in industrial settings.
22 mm Cutting Length Capacity
The 22 mm flute length provides enough depth for most sheet-goods profiling and pocketing passes without requiring multiple step-downs. At 50 mm overall length the tool offers adequate reach for typical fixture clearances while maintaining rigidity. Very thick stock or deep mortises will exceed the available cutting depth, requiring a longer-flute alternative.
Highlights
- Up/down spiral compresses wood fibres for clean edges
- Single flute clears chips fast in acrylic and PVC
- Tungsten steel body keeps sharpness through dense board
- 6 mm shank fits standard CNC collets directly
- 22 mm cutting length handles 50 mm overall depth
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Should I choose the 22 mm flute or the 50 mm overall length for deeper cuts?
The 22 mm flute length sets the maximum cutting depth, while the 50 mm overall length determines how far the tool reaches into the collet.
What does the up-down spiral do when the cutter is running in a CNC router?
The up-down compound spiral pulls chips upward and pushes fibres downward, giving clean edges on both faces of acrylic, PVC, density board and wood board.
What shank standard does the 6 mm shank follow and what does it limit?
The 6 mm shank fits standard 6 mm collets, limiting the tool to machines that accept a 6 mm shank diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
