YINGHUA
YINGHUA 6X22 DLC Coat One Flute UP DOWN Cut Spiral Carbide Mill Tool Cutters fastener
Set of five tungsten-steel spiral carbide cutters with DLC coating for compression milling in wood, plywood and particleboard
- TypeRight-Angle Drills
- Tungsten steel construction delivers precise cutting in wood, plywood and density board
- DLC coating resists wear for longer tool life on solid wood and particleboard
- Up-down spiral flute compresses fibres to prevent tear-out on both faces
- Right-angle shank fits compatible CNC machinery for secure, vibration-free operation
- Five-piece set provides ready replacements for continuous production runs
5-piece carbide milling set
This set contains five 6X22 DLC-coated one-flute up-down cut spiral carbide mill cutters designed for compression wood end milling. They are made from tungsten steel and intended for use with CNC machinery. The cutters suit industrial cutting tasks and are not for use by anyone under 18 years old.
Up-down cut compression geometry
The up-down spiral design compresses material from both faces during cutting, reducing tear-out on the top and bottom surfaces of wood, plywood, density board, solid wood and particleboard. This geometry limits chip evacuation speed compared with single-direction flutes, so feed rates must be managed to avoid clogging in deep slots. The single flute design prioritises finish quality over maximum material removal rate.
Five cutters for production runs
Five pieces provide enough cutters for extended production runs or for rotating tools to maintain sharp edges across a shift. The set handles the listed wood-based materials comfortably but is not intended for metals, composites or abrasive non-wood materials. Cutters will dull faster if used outside the specified application range.
Highlights
- Tungsten steel construction delivers precise cutting in wood, plywood and density board
- DLC coating resists wear for longer tool life on solid wood and particleboard
- Up-down spiral flute compresses fibres to prevent tear-out on both faces
- Right-angle shank fits compatible CNC machinery for secure, vibration-free operation
- Five-piece set provides ready replacements for continuous production runs
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Which version of the 6X22 DLC coat cutters should I choose for my CNC wood jobs?
The set contains five identical 6 mm shank cutters with 22 mm cutting length, so every piece in the pack is the same specification for compression milling in wood-based materials.
What does the 22 mm cutting length mean when the tool is in the spindle?
It allows a single pass to cut up to 22 mm deep in plywood, particleboard or solid wood, giving a clean top and bottom edge without stepping down.
What shank interface do these 6 mm carbide cutters use and what does it limit?
They have a plain 6 mm cylindrical shank for standard collets; the shank diameter fixes the maximum tool-holder size and the 22 mm flute length sets the deepest cut per pass.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
