YINGHUA
YINGHUA 6x17x50mm Two-Flute Up-Down Cut Carbide End Mill Cutter
A two-flute up-down cut carbide end mill for clean compression cuts in wood, plywood and PVC
- TypeRight-Angle Drills
- Clean top and bottom edges with up-down spiral flutes
- Tungsten steel construction resists wear during CNC routing
- Cuts wood, plywood, density board and particleboard
- 6 mm shank fits standard collets for quick changes
- Single-piece pack keeps the cutter protected until use
YINGHUA 6x17x50mm Carbide End Mill
This tungsten-steel cutter is built for CNC routing of wood, plywood, density board, solid wood and particleboard. The two-flute up-and-down spiral geometry compresses material from both faces to reduce tear-out on double-sided workpieces. It is sold as a single piece for hobbyists and small-shop operators who need a precise replacement tool.
Fits standard 6 mm collets on CNC routers
The 17 mm cutting length and 50 mm overall length suit common desktop and benchtop machines without requiring special holders. The up-cut flutes pull chips upward while the down-cut flutes press the top surface down, freeing the operator from sanding fuzzy edges on laminated panels. No additional hardware is included in the independent package.
For woodworkers cutting sheet goods on CNC equipment
Buyers who need to machine metals, plastics other than PVC or composites not listed should look elsewhere. The tool is not intended for handheld use or for anyone under 18 years old. Shops requiring multiple cutters or different diameters will need to source additional sizes separately.
Highlights
- Clean top and bottom edges with up-down spiral flutes
- Tungsten steel construction resists wear during CNC routing
- Cuts wood, plywood, density board and particleboard
- 6 mm shank fits standard collets for quick changes
- Single-piece pack keeps the cutter protected until use
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How deep can the 17 mm flute cut before the 50 mm shank hits the workpiece?
The 17 mm cutting length limits depth of cut; the 50 mm overall length includes the shank, so the flute cannot exceed 17 mm.
Does the tungsten-steel body run hot or loud when cutting plywood all day?
Carbide stays cooler than high-speed steel, but the tool itself has no fan or motor — heat and noise come from the spindle and feed rate.
What collet or chuck size fits the 6 mm shank on my CNC router?
A 6 mm ER collet or 6 mm drill chuck is required; the shank diameter is 6 mm.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
