YINGHUA
YINGHUA 6X15X50MM Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutters
A two-flute up-and-down spiral carbide mill cutter for compression cutting wood and PVC, sized 6x15x50mm
- TypeRight-Angle Drills
- Two-flute up/down spiral gives clean edges on both faces
- Tungsten steel body resists wear during extended cutting sessions
- 15 mm cutting length handles deep profiles in wood and composites
- 50 mm overall length fits standard CNC collets and routers
- Right-angle drill format allows use in tight or angled workspaces
Tungsten Steel Compression Cutter
This single-piece carbide milling cutter is designed for CNC machinery and handles wood, plywood, density board, solid wood, and particleboard. Its up-and-down spiral geometry compresses material fibres to reduce tear-out on both faces of the workpiece. The tool suits professional workshops and serious hobbyists who need clean edges on double-sided panels. It is not for buyers who need a multi-piece bit set or tools rated for metal cutting.
Thermals Noise And Power Draw
As a passive rotary cutting tool, it generates no electrical noise and draws no power of its own; thermal load and acoustic output depend entirely on the spindle and feed rates selected by the operator. Proper chip evacuation and appropriate spindle speeds prevent excessive heat build-up in the tungsten steel body. The cutter is unsuitable for high-volume production runs that demand liquid-cooled tooling or automated tool-change systems.
Critical Specification 6mm Shank 15mm Cut 50mm
The cutter has a 6 mm shank diameter, a 15 mm cutting length, and a 50 mm overall length; these three dimensions determine whether it fits your collet and reaches the required depth of cut. Verify your machine’s collet size and maximum tool length before purchasing. This item is not for users whose spindles accept only 1/4 inch or 8 mm shanks.
Highlights
- Two-flute up/down spiral gives clean edges on both faces
- Tungsten steel body resists wear during extended cutting sessions
- 15 mm cutting length handles deep profiles in wood and composites
- 50 mm overall length fits standard CNC collets and routers
- Right-angle drill format allows use in tight or angled workspaces
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How do I install the 6X15X50MM carbide mill cutter in my CNC machine and what step is often missed?
Insert the 6 mm shank fully into the collet, tighten securely, and verify the up-and-down flute orientation matches your material feed direction; the step often missed is confirming the compression geometry suits the specific wood or PVC thickness before starting the cut.
What maintenance or replacement will the tungsten steel cutter need after extended use on wood and particleboard?
The tungsten steel cutting edges will gradually dull when processing abrasive materials like particleboard; plan to resharpen or replace the cutter once edge wear reduces cut quality or increases feed resistance.
What limit appears first during sustained cutting of dense board with this 15 mm flute length tool?
Heat buildup in the 15 mm cutting zone typically becomes the limiting factor during prolonged passes in dense board, requiring reduced feed rates or cooling pauses to prevent premature edge degradation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
