YINGHUA
YINGHUA 6X12X50MM Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutters
Two-flute up-and-down spiral carbide cutter mills wood, plywood and PVC with clean compression cuts
- TypeRight-Angle Drills
- Up-cut and down-cut geometry prevents tear-out on both faces
- Tungsten steel body resists wear in abrasive wood composites
- 12 mm cutting length suits deep mortise and pocket work
- Single-flute clearance evacuates chips from dense plywood and particleboard
- 50 mm overall length fits standard CNC collets and routers
YINGHUA 6X12X50MM Carbide Mill Cutter
This single tungsten steel milling cutter is designed for CNC machinery. The two-flute up and down cut spiral geometry provides compression cutting action. It suits operators who need precise edge quality on wood, plywood, density board, solid wood and particleboard. The tool is supplied as one independently packaged piece.
Two Flute Compression Spiral Design
The up and down cut flutes push chips in opposite directions to reduce tear-out on both faces of the workpiece. Tungsten steel construction maintains sharpness during extended production runs. The right-angle drill format fits compatible CNC spindles directly without extra adapters. Industrial cutting use only; not for users under 18 years of age.
Check Spindle And Material Compatibility
Verify that your CNC spindle accepts the cutter shank diameter and overall length before ordering. Confirm the material you plan to cut matches the listed wood and board types. The tool is not rated for metals, plastics other than PVC, or hazardous materials. Ensure your machine guarding and dust extraction meet workshop safety standards.
Highlights
- Up-cut and down-cut geometry prevents tear-out on both faces
- Tungsten steel body resists wear in abrasive wood composites
- 12 mm cutting length suits deep mortise and pocket work
- Single-flute clearance evacuates chips from dense plywood and particleboard
- 50 mm overall length fits standard CNC collets and routers
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What shank diameter fits a standard collet for the 6X12X50MM carbide mill cutter?
The cutter has a 6 mm shank, so it fits any 6 mm ER collet or shrink-fit holder used on CNC routers.
What minimum cutting depth does the 12 mm flute length allow in a single pass?
The 12 mm flute length limits the depth of cut to 12 mm per pass in wood, plywood or PVC.
How do you avoid snapping the tungsten-steel bit when starting a plunge cut?
Ramp or helix into the material instead of a straight vertical plunge; a straight plunge overloads the two-flute tip and causes breakage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
