YINGHUA
YINGHUA 6.35x32mm UP DOWN Cut Two Flutes Carbide End Mill Cutter 5Pcs
A five-piece set of tungsten-steel compression end mills with 6.35 mm shanks and 32 mm cutting length for clean CNC routing of wood and composite boards
- TypeRight-Angle Drills
- 5-piece set covers multiple routing jobs
- 35 mm shank fits standard CNC collets
- Up-and-down compression flutes give clean edges on both faces
- Two-flute carbide design cuts wood, plywood and particleboard efficiently
- Tungsten steel construction resists wear for longer tool life
CNC Router Compression Cutter Set
This five-piece set provides tungsten steel end mills sized at 6.35x32mm for CNC router work. The up-and-down cut geometry compresses material fibres from both sides to reduce tear-out on laminated or veneered panels. Each two-flute spiral tool is intended for precise profiling and pocketing in wood-based sheet goods. They serve as direct replacements for worn cutters in a production environment.
Woodworkers Needing Clean Edges
The compression profile suits cabinetmakers, sign makers and furniture builders who require chip-free faces on plywood, density board, particleboard and solid wood. The cutters are rated for industrial use only and must not be operated by anyone under 18 years of age. Shops that primarily machine plastics, aluminium or other non-ferrous metals should select tooling designed for those materials instead.
Sustained Routing In Sheet Goods
Tungsten steel construction maintains cutting geometry during long production runs through dense board stocks. The dual-direction flute evacuates chips efficiently, limiting heat build-up that can dull edges prematurely. Consistent feed rates and proper dust extraction keep the tools stable through extended profiling cycles without the deflection seen in lighter-duty bits.
Highlights
- 5-piece set covers multiple routing jobs
- 35 mm shank fits standard CNC collets
- Up-and-down compression flutes give clean edges on both faces
- Two-flute carbide design cuts wood, plywood and particleboard efficiently
- Tungsten steel construction resists wear for longer tool life
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What shank diameter must my CNC router collet accept for these 6.35 mm cutters?
The cutters have a 6.35 mm shank, so your collet or tool holder must grip that exact diameter.
Will the up-and-down flute geometry reduce tear-out on the top and bottom faces of 32 mm thick plywood?
Yes, the compression spiral pulls chips toward the centre, giving clean edges on both surfaces of 32 mm material.
How can I confirm each cutter is cutting cleanly after installation?
Run a test pass in scrap wood and check that both faces show no splintering and the cut width matches the 6.35 mm tool diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
