YINGHUA
YINGHUA 5X17X50MM Two Flutes UP DOWN Spiral Carbide Mill Cutter
A two-flute up-down spiral carbide cutter for compression cutting wood and PVC on CNC machinery
- TypeRight-Angle Drills
- Two-flute up-down spiral gives clean top-and-bottom edges on wood and PVC
- Tungsten steel body resists wear during long CNC runs
- 5 mm shank fits standard collets for quick tool changes
- 17 mm cutting length handles thick panel stock in a single pass
- Not for users under 18; industrial cutting only
5 mm Compression Router Bit
This 5 mm diameter compression router bit has a 17 mm cutting length and a 50 mm overall length. It is designed for CNC machinery and handheld routing in wood, plywood, density board, solid wood and particleboard. The tungsten steel construction provides wear resistance for precise, clean cuts in sheet goods. It is sold as a single cutter in an independent package.
Check Shank and Machine Compatibility
Verify that your collet or chuck accepts a 5 mm shank before ordering. Ensure the spindle speed range of your CNC router or handheld machine suits carbide tooling in the materials listed. Confirm the 17 mm cutting depth matches the thickness of your workpiece to avoid bottoming out. This tool is restricted to users aged 18 years and over for industrial cutting only.
Up-Down Geometry for Chip-Free Edges
The two-flute up-down spiral pushes chips upward and downward to compress the workpiece faces, reducing tear-out on both surfaces. This geometry frees you from secondary finishing passes on double-sided laminates and veneers. The tungsten steel body withstands the heat generated in dense materials such as particleboard. Use with appropriate dust extraction and rigid work holding for best results.
Highlights
- Two-flute up-down spiral gives clean top-and-bottom edges on wood and PVC
- Tungsten steel body resists wear during long CNC runs
- 5 mm shank fits standard collets for quick tool changes
- 17 mm cutting length handles thick panel stock in a single pass
- Not for users under 18; industrial cutting only
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Does the 5X17X50MM carbide mill cutter come individually packaged or are additional accessories required?
The cutter is supplied in a single independent package containing one UP and Down Compound Milling Cutter, so no extra items are needed for basic use.
How do I decide between the 5X17X50MM dimensions for my CNC routing work?
The 5 mm shank, 17 mm cutting length and 50 mm overall length suit compression cutting in wood, plywood, density board and particleboard on standard CNC machines.
What does the up-down spiral geometry actually do when the 5X17X50MM bit runs in a CNC machine?
The two-flute up-down spiral creates a compression cut that shears the top and bottom surfaces of wood or PVC simultaneously, reducing tear-out on both faces.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
