YINGHUA
YINGHUA 5Pcs 6x32mm Blue UP And DOWN Cut Two Flutes Spiral Carbide Mill Tool Cutters
Five-piece set of tungsten-steel compression end mills with up-cut and down-cut flutes for clean CNC routing of wood and composite boards
- TypeRight-Angle Drills
- 5-piece set covers multiple routing jobs
- Up-and-down cut geometry reduces tear-out on both faces
- Two-flute spiral clears chips for smoother finish
- Tungsten-steel carbide holds sharp edge in abrasive boards
- Suited for wood, plywood, density board and particleboard
Five-piece carbide milling set
This five-piece set provides tungsten steel milling cutters sized at 6 by 32 millimetres for CNC router work. The blue-coated tools are designed for compression cutting in wood, plywood, density board, solid wood and particleboard. They suit workshops that need ready-to-use replacements for standard routing jobs.
Up-and-down compression geometry
Each cutter uses a two-flute spiral with opposing up-cut and down-cut sections to compress the workpiece faces during the pass. This geometry reduces tear-out on both the top and bottom surfaces of laminated or veneered panels. The right-hand rotation matches conventional CNC router spindles.
Tungsten steel under sustained routing
Tungsten steel construction maintains edge integrity through extended production runs in abrasive sheet goods. The compression design distributes cutting forces evenly, limiting heat buildup when the tool stays engaged for long periods. Industrial use only; not for operators under eighteen years of age.
Highlights
- 5-piece set covers multiple routing jobs
- Up-and-down cut geometry reduces tear-out on both faces
- Two-flute spiral clears chips for smoother finish
- Tungsten-steel carbide holds sharp edge in abrasive boards
- Suited for wood, plywood, density board and particleboard
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What does the 32 mm cutting length mean for my CNC jobs?
The 32 mm flute length lets you plunge or profile up to that depth in a single pass on wood, plywood or particleboard.
What shank standard does the 6 mm diameter use?
A plain 6 mm cylindrical shank that seats directly in 6 mm collets or ER collet chucks sized for 6 mm.
How much space do the 32 mm flutes need inside the spindle?
Each cutter is 32 mm long on the cutting portion, so allow at least that much clearance below the collet face.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
