YINGHUA
YINGHUA 5Pcs 6.35x25mm UP And DOWN Cut Two Flutes Spiral Carbide Mill Tool Cutters
Set of five 6.35x25mm tungsten-steel compression cutters with up-cut and down-cut flutes for CNC routing of wood and sheet materials
- TypeRight-Angle Drills
- Clean cuts in wood and board thanks to up-and-down spiral flutes
- Five-piece set provides multiple cutters for CNC router jobs
- Tungsten steel construction resists wear during prolonged use
- 35 mm shank fits standard collets on compatible machines
- 25 mm cutting length handles thick stock in a single pass
Five-piece carbide milling cutter set
This five-piece set supplies 6.35 mm shank cutters with 25 mm cutting length for CNC routers. Two-flute up-and-down spirals give a compression action that shears both faces of the workpiece. Tungsten steel construction resists wear when profiling wood, plywood, density board, solid wood and particleboard. The tools are intended for industrial cutting by users aged 18 and over.
Compression geometry for double-sided finish
Up-and-down flutes push chips away from both surfaces, reducing tear-out on laminated and veneered panels. Two flutes balance chip evacuation with edge strength in natural timber and engineered boards. The 25 mm flute length limits depth of cut in a single pass on thicker stock. Carbide tips maintain sharpness longer than high-speed steel but will chip if feed rates are excessive.
Ready-to-use multi-pack for workshop spares
Five identical cutters let operators rotate tools and keep production running while one is being sharpened. No collets, collet nuts or tool holders are included, so existing 6.35 mm tooling must be compatible. The set contains no software, guides or coolant accessories. Safety notes restrict use to trained adults in industrial environments.
Highlights
- Clean cuts in wood and board thanks to up-and-down spiral flutes
- Five-piece set provides multiple cutters for CNC router jobs
- Tungsten steel construction resists wear during prolonged use
- 35 mm shank fits standard collets on compatible machines
- 25 mm cutting length handles thick stock in a single pass
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Will these 6.35 mm shank cutters fit the collet on my older CNC router?
The 6.35 mm shank matches standard 1/4-inch collets found on many CNC routers, so they should seat correctly in compatible machines.
How can I confirm the up-cut and down-cut flutes are cutting cleanly after installation?
Run a test cut in scrap wood; a clean top and bottom edge with no tear-out shows the compression geometry is working as intended.
Does the five-piece set include any collets, wrenches or spare screws?
The box contains only the five 6.35x25 mm carbide cutters; collets, wrenches and mounting hardware must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
