YINGHUA
YINGHUA 5Pcs 3.175x17mm Compression End Mill Cutter
A five-piece carbide end-mill set with up-and-down spiral flutes for clean CNC routing of wood and composite boards
- TypeRight-Angle Drills
- 5-piece set covers multiple routing jobs
- 175 mm shank fits common CNC collets
- 17 mm cutting length handles thick stock
- Up-and-down flutes compress fibres for clean edges
- Tungsten-steel carbide resists wear in wood and composites
5-Piece Compression End Mill Set
This set contains five tungsten steel compression end mills for CNC router woodwork. Each cutter measures 3.175 mm in diameter with a 17 mm cutting length. The up-and-down flute geometry produces clean edges on both faces of the material. They are intended for cutting wood, plywood, density board, solid wood and particleboard.
Shank Fit And Flute Care
The 3.175 mm shank fits standard collets used on many desktop CNC routers. Insert the tool fully and tighten the collet evenly to prevent run-out. The compression design pushes chips in opposite directions, so feed rates must be balanced to avoid flute clogging. The supplier notes the bladed product is not for use by people under 18 years.
Sustained Cutting In Sheet Goods
Tungsten steel construction maintains edge life during extended passes through abrasive sheet materials such as particleboard and density board. The two-flute spiral evacuates chips continuously, reducing heat build-up during long routing sessions. The tool is designated for industrial cutting only, not for hazardous articles.
Highlights
- 5-piece set covers multiple routing jobs
- 175 mm shank fits common CNC collets
- 17 mm cutting length handles thick stock
- Up-and-down flutes compress fibres for clean edges
- Tungsten-steel carbide resists wear in wood and composites
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How do I verify the 3.175 mm compression end mill is cutting cleanly after installation?
Run a test cut in plywood or solid wood and check for smooth edges on both faces without tear-out, confirming the up-and-down flute action is working.
What comes in the box and do I need extra collets for the 3.175 mm shank?
The package contains five tungsten-steel compression cutters with 3.175 mm shanks; purchase a matching 3.175 mm collet separately if your router does not already have one.
Which of the five cutters should I choose for cutting particleboard versus density board?
All five cutters share the same 3.175x17 mm two-flute geometry, so any one of them handles particleboard, density board, plywood and solid wood equally.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
