YINGHUA
YINGHUA 5pcs 3.175X17 Blue Nano One Flute UP DOWN Cut Spiral Carbide Mill Tool Cutters
Five-piece carbide cutter set with 3.175 mm shanks and 17 mm cutting length for CNC wood routing
- TypeRight-Angle Drills
- 5-piece set covers multiple CNC jobs
- 175 mm shank fits standard collets
- 17 mm cutting length handles thick stock
- Up-down spiral gives clean edges on both faces
- Tungsten steel resists wear in wood and composites
5-piece Tungsten steel cutter set
This set contains five spiral carbide mill cutters sized 3.175X17 with a blue nano coating. They are intended for CNC machinery users who need precise cutting in wood, plywood, density board, solid wood and particleboard. The one-flute up-down cut design supports compression cutting for cleaner edges. The tools are new and supplied as a five-piece pack.
Sustained cutting in wood composites
The tungsten steel construction and blue nano coating are built to resist wear during extended CNC sessions on materials such as particleboard and density board. The up-down spiral geometry helps evacuate chips continuously, reducing heat buildup when the tool runs for long periods. The single-flute profile maintains a consistent cutting action without the vibration that can develop in multi-flute bits under continuous load. Industrial use is specified by the manufacturer.
Check shank fit and age restriction
Verify that your CNC collet or chuck accepts a 3.175 mm shank before ordering. The supplier states the bladed product is not for people under 18 years old and is only for industrial cutting, so confirm your workshop policies allow this classification. No other dimensions or machine compatibility data are provided in the specifications.
Highlights
- 5-piece set covers multiple CNC jobs
- 175 mm shank fits standard collets
- 17 mm cutting length handles thick stock
- Up-down spiral gives clean edges on both faces
- Tungsten steel resists wear in wood and composites
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How much heat does the 3.175X17 carbide cutter generate during prolonged CNC routing?
The tungsten steel construction and single-flute spiral design evacuate chips efficiently, keeping the 3.175 mm shank cool during extended wood, plywood or density-board cutting sessions.
What collet or holder size is required to run these 3.175 mm shank cutters?
A 3.175 mm (1/8 inch) ER collet, shrink-fit holder or compatible drill chuck is needed to secure the 17 mm cutting-length tools in your CNC spindle or router.
Will these UP DOWN compression bits work on an older CNC router with lower spindle speed?
Yes, the one-flute geometry reduces cutting forces, allowing the 3.175X17 bits to perform clean compression cuts in solid wood and particleboard even on machines with modest RPM ranges.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
