YINGHUA
YINGHUA 5Pcs 10x42mm UP And DOWN Cut Two Flutes Spiral Carbide Mill Tool Cutters
Five 10 mm shank by 42 mm flute compression cutters with up-cut and down-cut flutes for clean CNC routing of wood and sheet materials
- TypeRight-Angle Drills
- 5-piece set covers multiple CNC jobs
- Up-down spiral flutes compress wood fibres for clean edges
- Two-flute carbide geometry gives precise, easy cutting
- Tungsten steel construction resists wear in abrasive materials
- Cuts wood, plywood, density board, solid wood, particleboard
Five-piece carbide cutter set
This set contains five spiral carbide mill cutters sized 10x42 mm with two flutes and an up-and-down compression geometry. They are made from tungsten steel and intended for CNC router work on wood, plywood, density board, solid wood and particleboard. The compression design helps produce clean edges on both faces of the material.
CNC woodworkers needing clean double-sided cuts
The up-and-down flute pattern suits users who require tear-free surfaces on the top and bottom of panels in a single pass. Hobbyists limited to single-flute or straight-flute tooling will not achieve the same edge quality. Buyers who need to cut metal, plastic composites or non-wood materials should look at alternative tooling.
10 mm shank diameter
Each cutter has a 10 mm shank, so the machine spindle or collet must accept that exact size. The overall length is 42 mm and the cutting geometry is fixed as a two-flute compression spiral. No other shank sizes or flute counts are included in this pack.
Highlights
- 5-piece set covers multiple CNC jobs
- Up-down spiral flutes compress wood fibres for clean edges
- Two-flute carbide geometry gives precise, easy cutting
- Tungsten steel construction resists wear in abrasive materials
- Cuts wood, plywood, density board, solid wood, particleboard
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Should I pick the 10 mm diameter or the 42 mm length version?
Each cutter in the set is 10 mm in diameter and 42 mm in overall length; there is no separate version to choose.
What does the up-and-down cut geometry do when the tool is in a CNC router?
The opposing flutes push chips upward and downward at the same time, compressing the material to give clean edges on both faces of wood, plywood or particleboard.
How does the tungsten steel construction affect the tool’s cutting limits?
Tungsten steel keeps the two flutes sharp longer in abrasive materials such as density board and solid wood, extending tool life before re-sharpening is needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
