YINGHUA
YINGHUA 5pc 4×22×45mm Two-Flute Up/Down Cut Carbide Mill Cutter Set
Five two-flute up/down cut carbide mill cutters sized 4×22×45 mm for compression cutting wood, plywood, density board and particleboard
- TypeRight-Angle Drills
- Five cutters for multi-material routing
- Two-flute up/down spiral reduces tear-out on both faces
- 4 mm shank fits common CNC collets
- 22 mm cutting length handles thick stock
- Tungsten steel construction resists wear in wood and PVC
Five-Piece Carbide Cutter Set
This five-piece set supplies 4 mm diameter tungsten-steel end mills with a 22 mm flute length and 45 mm overall length. Each cutter uses two flutes in an up-and-down spiral geometry designed for compression cutting. The cutters are intended for CNC routing of wood, plywood, density board, solid wood and particleboard.
For CNC Woodworking Shops
The compression profile reduces tear-out on both faces of laminated or veneered sheet goods, making the set suited to cabinet shops and sign makers who need clean edges. Buyers who require single-flute cutters for chip clearance in plastics, or who need larger diameters for heavy material removal, should look at something else.
4 mm Shank with Up-Down Spiral
The 4 mm shank diameter is the critical dimension that decides fit in your collet or tool holder; verify your machine accepts this size before ordering. The up-and-down flute arrangement controls chip flow in both directions during the cut.
Highlights
- Five cutters for multi-material routing
- Two-flute up/down spiral reduces tear-out on both faces
- 4 mm shank fits common CNC collets
- 22 mm cutting length handles thick stock
- Tungsten steel construction resists wear in wood and PVC
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What does the 4 mm diameter mean for cutting performance?
The 4 mm cut width lets the tool make narrow profiles and fine detail passes in wood, plywood, density board, solid wood and particleboard.
What shank interface does this cutter use and what does it limit?
The cutter has a 4 mm straight shank for direct collet clamping, so run-out depends on the holder and the tool is limited to light-duty routing in the listed materials.
What physical clearance does the 45 mm overall length require?
The 45 mm total length needs at least that much Z-axis travel plus the collet length, so check your CNC router's vertical clearance before use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
