YINGHUA
YINGHUA 5pc 3.175x3.175x17x38mm 2-Flute Carbide End Mill Set
Five carbide end mills with 3.175 mm shanks and 17 mm cutting length for CNC engraving wood, acrylic and similar materials
- TypeRight-Angle Drills
- 5-piece set covers multiple CNC jobs
- 175 mm shank fits standard collets
- 17 mm flute length for shallow cuts
- 38 mm overall length suits compact routers
- Tungsten steel carbide resists wear in wood and plastics
Five-piece carbide end-mill set
This five-piece set supplies tungsten-steel cutters for CNC engraving and fine cutting work. Each tool carries a colourful coating and a two-flute straight-slot geometry suited to acrylic, PVC, nylon, resin, wood and plywood. The cutters are intended for industrial use only and are not for anyone under 18 years of age.
3.175 mm shank and 17 mm cutting length
Every cutter shares a 3.175 mm shank diameter with a 17 mm flute length and 38 mm overall length, giving consistent reach in collets sized for that shank. The five identical pieces provide spare tools for the same operation but no variation for different depths or diameters. Buyers needing multiple cutting diameters or longer reach must look elsewhere.
Two-flute straight-slot geometry
The straight-slot, two-flute design governs chip evacuation and surface finish on the listed plastics and woods. It is the single specification that decides whether the set matches the required cutting strategy for a given CNC job.
Highlights
- 5-piece set covers multiple CNC jobs
- 175 mm shank fits standard collets
- 17 mm flute length for shallow cuts
- 38 mm overall length suits compact routers
- Tungsten steel carbide resists wear in wood and plastics
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Will the 3.175 mm shank fit my older CNC router collet?
Each cutter has a 3.175 mm shank diameter, so it fits any collet or chuck sized for 3.175 mm tooling.
How can I verify the 2-flute geometry is cutting cleanly after installation?
Run a test pass in wood or acrylic; a smooth finish with no chatter and consistent chip evacuation shows the two straight flutes are working as intended.
Does the five-piece set include collets or only the coated carbide cutters?
The box contains five 2-flute straight-slot carbide end mills measuring 3.175x3.175x17x38 mm; collets or holders must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
