YINGHUA
YINGHUA 5pc 3.175x22mm Blue Nano Compression End Mill Cutters
A five-piece set of 3.175 mm by 22 mm compression end-mill cutters for clean CNC cuts in wood and board materials
- TypeRight-Angle Drills
- 5-piece set equips CNC machines for continuous production
- 175 mm shank fits standard collets without adapters
- 22 mm cutting length handles thick wood panels in one pass
- Blue nano coating reduces friction for cleaner edges on plywood and particleboard
- Single-flute up-down spiral compresses fibres to prevent tear-out on both faces
5-piece compression cutters for CNC woodwork
This set contains five tungsten-steel end mills designed for CNC machinery. Each cutter measures 3.175 mm in shank diameter and 22 mm in cutting length. The one-flute up-down spiral geometry produces clean edges on both faces of the workpiece. They are intended for wood, plywood, density board, solid wood and particleboard.
Check shank size and machine clearance
Verify that your CNC spindle or collet accepts a 3.175 mm shank before ordering. Confirm the available Z-axis travel can accommodate the 22 mm cutting length plus the material thickness. The tools are rated for industrial cutting only and must not be used by anyone under 18 years of age.
Tungsten steel with blue nano coating
The solid carbide construction resists wear during extended routing sessions. Blue nano coating reduces friction and helps evacuate chips in compressed wood fibres. Compression geometry pushes chips upward and downward simultaneously, minimising tear-out on laminated surfaces. Five cutters per pack provide ready replacements for high-volume production runs.
Highlights
- 5-piece set equips CNC machines for continuous production
- 175 mm shank fits standard collets without adapters
- 22 mm cutting length handles thick wood panels in one pass
- Blue nano coating reduces friction for cleaner edges on plywood and particleboard
- Single-flute up-down spiral compresses fibres to prevent tear-out on both faces
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What comes in the box and do I need to buy a collet or holder separately?
The package contains five 3.175 mm shank cutters. A compatible 3.175 mm collet or tool holder is required and is not included.
The listing shows one size — how do I know if 3.175x22 mm is right for my job?
These cutters have a 3.175 mm shank and 22 mm cutting length, suited for wood, plywood, density board, solid wood and particleboard on CNC machines.
What does the 22 mm cutting length mean when the bit is in the spindle?
You can plunge or profile up to 22 mm deep in a single pass with the up-down spiral geometry for clean edges on both faces.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
