YINGHUA
YINGHUA 5 Pieces 6X32X60MM BlueNano Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutters
A five-piece tungsten-steel set with up-and-down spiral flutes cuts wood, plywood and particleboard cleanly on CNC machines
- TypeRight-Angle Drills
- Five-piece set provides ready-to-use spares for continuous CNC work
- 6 mm shank, 32 mm flute and 60 mm overall length suit standard collets
- BlueNano-coated tungsten steel resists wear during abrasive material cuts
- Up-and-down spiral geometry compresses fibres for clean edges in wood and PVC
- Two-flute carbide design balances chip clearance with cutting stability
Five-Piece Carbide Mill Cutter Set
This set contains five carbide milling cutters designed for CNC machinery. Each cutter measures 6 by 32 by 60 millimetres and features a BlueNano coating. The two-flute up-and-down spiral geometry produces clean compression cuts. They are made from tungsten steel for hardness and wear resistance.
Suitable for Wood and Composite Cutting
These cutters handle wood, plywood, density board, solid wood and particleboard effectively. The up-and-down flute design reduces tear-out on both faces of the workpiece. They are not intended for metalworking or abrasive non-wood materials. The tool is restricted to users aged 18 and over.
6x32x60mm Two-Flute Compression Geometry
The critical specification is the 6 millimetre shank with 32 millimetre cutting length and 60 millimetre overall length. The opposing spiral flutes compress chips toward the centre for a smooth finish on double-sided laminates. Verify that your CNC collet accepts a 6 millimetre shank before purchase.
Highlights
- Five-piece set provides ready-to-use spares for continuous CNC work
- 6 mm shank, 32 mm flute and 60 mm overall length suit standard collets
- BlueNano-coated tungsten steel resists wear during abrasive material cuts
- Up-and-down spiral geometry compresses fibres for clean edges in wood and PVC
- Two-flute carbide design balances chip clearance with cutting stability
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What shank diameter do the 6X32X60MM BlueNano cutters use, and what collet size does that limit me to?
The cutters have a 6 mm shank, so they require a 6 mm collet or chuck; any larger collet will not grip them securely.
What is the overall length and flute length of each cutter, and how much Z-travel does my CNC need?
Each cutter measures 60 mm overall with a 32 mm cutting length, so the spindle must provide at least 32 mm of usable Z-travel plus clearance for the tool holder.
How should I install these up-and-down spiral cutters in a CNC router, and what orientation mistake causes poor finish?
Insert the 6 mm shank fully into a clean collet, tighten evenly, and ensure the up-cut flutes face upward; reversing the cutter pulls chips into the cut and tears the top surface.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
