YINGHUA
YINGHUA 5 pieces 6X32 Blue Nano One Flute UP DOWN Cut Spiral Carbide Mill Tool Cutters
A set of five carbide spiral cutters with up-down flutes for clean compression cuts in wood and board materials
- TypeRight-Angle Drills
- Five cutters included for immediate multi-job readiness
- Tungsten steel construction resists wear during prolonged cutting
- Up-down spiral geometry reduces tear-out on both faces
- Single-flute design clears chips efficiently in wood composites
- Rated for users aged 18 and above for industrial safety
5-Piece Carbide Mill Cutter Set
This set contains five tungsten-steel spiral cutters designed for compression milling in CNC machinery. Each cutter has a single flute and an up-down cutting geometry for clean edges on wood-based materials. The tools are supplied new and ready for industrial use.
Woodworkers and CNC operators needing precise edge
Suitable for cutting wood, plywood, density board, solid wood and particleboard on a CNC router. Not intended for handheld drilling, metalworking, plastics or any hazardous material processing. Buyers under 18 years old must not use these bladed tools.
Check shank diameter and collet compatibility
Verify that your CNC spindle accepts the cutter shank size and that the machine can run a single-flute compression tool at appropriate feed rates. Ensure your dust extraction and workpiece clamping are adequate for the materials listed.
Highlights
- Five cutters included for immediate multi-job readiness
- Tungsten steel construction resists wear during prolonged cutting
- Up-down spiral geometry reduces tear-out on both faces
- Single-flute design clears chips efficiently in wood composites
- Rated for users aged 18 and above for industrial safety
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What shank diameter must my CNC collet accept for these 6X32 cutters?
The cutters have a 6 mm shank, so the collet or chuck must grip 6 mm.
Will the up-down flute geometry work on a fixed-base router running at a single speed?
Yes, the compression spiral cuts cleanly on both faces even at constant RPM.
How can I verify the blue nano coating is intact after the first job?
Inspect each flute under bright light; the coating should show a uniform blue sheen without dull spots.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
