YINGHUA
YINGHUA 5 pieces 6X22X50MM BlueNano Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutters
Five carbide cutters with up-and-down flutes for clean compression cuts in wood and PVC
- TypeRight-Angle Drills
- Five-piece set covers multiple CNC jobs
- 6 mm shank fits standard collets
- 22 mm cutting length handles thick stock
- Up-and-down flutes compress chips for clean edges
- Tungsten-steel body resists wear in wood and PVC
YINGHUA 5-piece BlueNano carbide mill cutter set
This YINGHUA set supplies five 6X22X50MM BlueNano two-flute up-and-down cut spiral carbide mill cutters designed for compression routing in wood and PVC. The tungsten steel construction is built for CNC machinery and aims to deliver a precise, easy cutting experience across materials such as plywood, density board, solid wood and particleboard. The cutters are packaged individually.
Suited for CNC operators cutting wood composites
These bits suit CNC operators who need compression-style cutters for wood, plywood, density board, solid wood and particleboard as well as PVC. They are not intended for users under 18 years of age. Buyers who require cutters for metals, stone, glass or other non-wood and non-PVC materials should look at something else. The product is specified for industrial cutting use only.
6X22X50MM two-flute up-and-down compression geometry
The single specification that decides fit is the 6X22X50MM two-flute up-and-down compression geometry, which determines whether the cutter matches your CNC collet and the material thickness you are machining. Verify that your machine accepts this shank and flute configuration before purchasing. The tungsten steel substrate and BlueNano coating support the stated wood and PVC applications.
Highlights
- Five-piece set covers multiple CNC jobs
- 6 mm shank fits standard collets
- 22 mm cutting length handles thick stock
- Up-and-down flutes compress chips for clean edges
- Tungsten-steel body resists wear in wood and PVC
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What collet or chuck size is needed for the 6 mm shank on these cutters?
A 6 mm ER collet or drill chuck will secure the 6 mm shank on each cutter.
Will the up-and-down flute geometry reduce tear-out on the plywood and density board I already machine?
The opposing flutes shear the top and bottom faces simultaneously, giving clean edges on plywood, density board and solid wood.
How can I confirm the BlueNano coating is still effective after a few jobs?
The cutting edges should stay sharp and the blue-grey surface intact; dull edges or worn colour mean the coating has depleted.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
