YINGHUA
YINGHUA 5 pieces 3.175X17X38 DLC CoatTwo Flutes UP And DOWN Cut Spiral Carbide Mill Cutters
Set of five carbide mill cutters with DLC coating for compression cutting wood and PVC
- TypeRight-Angle Drills
- 5-piece set covers multiple jobs
- 175 mm shank fits standard collets
- 17 mm cutting length handles thick stock
- 38 mm overall length gives rigid reach
- DLC coating reduces friction in wood and PVC
Five-Piece DLC-Coated Carbide Cutter Set
This set supplies five 3.175 mm diameter spiral end mills with a diamond-like carbon coating and two up-and-down flutes. They are intended for CNC operators and woodworking shops that need compression-style cutters for clean edges on both faces of the workpiece. The tools arrive new and ready for industrial routing tasks.
Tungsten Steel Substrate
The tungsten steel body provides the rigidity needed for solid wood, plywood, density board and particleboard. The 17 mm flute length gives adequate chip clearance for shallow pockets and through-cuts, while the 38 mm overall length fits standard collets. Very deep mortises or heavy metal removal will exceed the available flute capacity.
Individually Packaged Cutters For Direct Machine
Each cutter is supplied in its own independent package, so tools stay protected and can be loaded straight into the spindle without extra handling. The DLC coating reduces adhesive wear on abrasive composites and extends intervals between changes. No software, collets or additional hardware are included in the pack.
Highlights
- 5-piece set covers multiple jobs
- 175 mm shank fits standard collets
- 17 mm cutting length handles thick stock
- 38 mm overall length gives rigid reach
- DLC coating reduces friction in wood and PVC
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Will these 3.175 mm shank cutters fit the collet on my older CNC router?
The cutters have a 3.175 mm shank diameter; they will fit any collet or chuck that accepts that exact size.
How can I verify the DLC coating is performing correctly after the first cuts?
Inspect the cutting edges for uniform wear and check that wood or PVC surfaces show clean, chip-free edges without burning.
What exactly is included in the package and do I need extra collets or adapters?
The box contains five individual UP-and-down spiral carbide cutters (3.175×17×38 mm); collets, adapters or tool holders are not included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
