YINGHUA
YINGHUA 5-piece 8x42x80 mm UP/DOWN Cut Carbide Mill Cutter Set
Five-piece carbide mill cutter set with up-and-down spiral flutes for compression cutting in wood and PVC
- TypeRight-Angle Drills
- Five-piece set gives spare cutters for continuous CNC work
- 8 mm shank fits common collets without adapters
- 42 mm flute length handles deep profiles in one pass
- 80 mm overall length reaches into cavities on tall stock
- Up/down compression geometry shears top and bottom faces cleanly
Product Identity
The YINGHUA 5-piece set supplies carbide milling cutters sized 8x42x80 mm for CNC machinery. Each bit uses a two-flute up-and-down spiral geometry that compresses material during cutting. The tungsten steel construction resists wear when machining wood, plywood, density board, solid wood and particleboard. The pack contains five identical cutters in single independent packages.
Suitable Users
Woodworkers and CNC operators who need clean edges on both faces of sheet goods will benefit from the compression action. The cutters are rated for industrial use only and must not be handled by anyone under 18 years of age. Buyers seeking tools for handheld routing, metal milling or non-wood plastics should look elsewhere because the design targets compressed wood-based materials exclusively.
Deciding Specification
The 8 mm shank diameter, 42 mm cutting length and 80 mm overall length determine whether the bits fit your machine’s collet and reach requirements. Verify those three dimensions against your CNC specification before purchasing.
Highlights
- Five-piece set gives spare cutters for continuous CNC work
- 8 mm shank fits common collets without adapters
- 42 mm flute length handles deep profiles in one pass
- 80 mm overall length reaches into cavities on tall stock
- Up/down compression geometry shears top and bottom faces cleanly
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Should I pick the 5-piece set or look for a different count for my CNC work?
The set contains five identical 8×42×80 mm two-flute up/down cutters so one pack gives you five fresh edges for wood, plywood, density board and particleboard.
What does the 42 mm flute length mean when I am cutting solid wood on my router?
A 42 mm flute lets you plunge or profile up to that depth in a single pass, reducing the number of passes needed in thick stock.
Will the 8 mm shank work in a standard 8 mm collet and what material limit does the tungsten steel impose?
The 8 mm shank fits any 8 mm ER or collet chuck, and the tungsten steel construction is rated for wood, plywood, density board and particleboard only.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
