YINGHUA
YINGHUA 5-piece 6x17 One Flute UP DOWN Cut Spiral Carbide Mill Tool Cutters
A five-piece set of 6 mm by 17 mm single-flute up-down spiral carbide cutters for CNC wood routing
- TypeRight-Angle Drills
- 5-piece set covers multiple CNC jobs without reordering
- One-flute up-down spiral gives clean compression cuts in wood
- Tungsten steel construction resists wear during heavy routing
- Suitable for plywood, density board, solid wood and particleboard
- Industrial-grade cutters designed for users aged 18 and over
Tungsten steel compression cutters
This five-piece set of 6x17 one-flute up-down spiral carbide mill cutters is built from tungsten steel for CNC routing. The compression geometry shears wood fibres both upward and downward to reduce tear-out on plywood, density board, solid wood and particleboard. Each cutter is a direct replacement for standard CNC tooling. They arrive new and ready for industrial use.
CNC operators needing clean edges
Woodworkers running CNC routers who want splinter-free faces on double-sided panels will benefit from the up-down flute action. The tools are rated for users aged 18 and over and are intended only for industrial cutting tasks. Hobbyists without dust extraction, rigid work-holding or appropriate machine guarding should consider alternative tooling.
Five cutters for batch machining
The pack supplies five identical cutters so a shop can rotate tools during long production runs without stopping to resharpen. One flute geometry clears chips quickly in softer sheet goods but can overload in dense hardwoods or deep slots where chip evacuation slows. When the cutting edges dull, the carbide tips require professional regrinding rather than shop sharpening.
Highlights
- 5-piece set covers multiple CNC jobs without reordering
- One-flute up-down spiral gives clean compression cuts in wood
- Tungsten steel construction resists wear during heavy routing
- Suitable for plywood, density board, solid wood and particleboard
- Industrial-grade cutters designed for users aged 18 and over
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What CNC machine collet size accepts the 6 mm shank on these cutters?
The cutters have a 6 mm shank, so they fit any CNC spindle or router collet that grips 6 mm tooling.
Will the up-down spiral geometry reduce tear-out on the veneered plywood I already run?
Yes, the up-down flute compresses the top and bottom surfaces simultaneously, giving clean edges on double-sided plywood and density board.
How can I verify the tungsten-steel flutes stay sharp after the first few jobs?
Inspect the cut edges — clean, burn-free cuts in solid wood and particleboard confirm the flutes are still sharp.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
