YINGHUA
YINGHUA 5-piece 6.35x32x60mm Two Flutes UP DOWN Cut Spiral Carbide Mill Cutters fastener
Five carbide cutters with up-down spiral flutes cut wood, plywood and particleboard cleanly in CNC routers
- TypeRight-Angle Drills
- Five-piece carbide set for CNC replacement
- Up-down spiral flutes cut wood and PVC cleanly
- Tungsten steel construction resists wear
- 35 mm shank fits standard collets
- 32 mm flute length and 60 mm overall for deep cuts
Professional CNC Cutting Set
This five-piece carbide cutter set is built for CNC routing work where clean edges on both faces matter. Each bit uses a two-flute up-and-down spiral geometry that shears upward and downward at the same time. The cutters are made from tungsten steel for long edge life in abrasive sheet goods. They suit cabinet shops, sign makers and serious hobbyists who need compression cutting in one pass.
Suited for Double-Sided Sheet Work
The compression design excels when cutting plywood, laminate, MDF, solid wood and particleboard where tear-out on the top or bottom surface is unacceptable. It is not intended for plunge drilling, metal machining or hand-held router use. Buyers who need single-flute clearing speed, larger shank diameters or specialised coating options should look at other tooling ranges.
6.35 mm Shank with 32 mm Cut Length
Every cutter in the pack shares a 6.35 mm shank, 32 mm flute length and 60 mm overall length. This single specification decides whether the bits fit your collet and reach the depth your jobs demand. No other shank size or flute length is included in this set.
Highlights
- Five-piece carbide set for CNC replacement
- Up-down spiral flutes cut wood and PVC cleanly
- Tungsten steel construction resists wear
- 35 mm shank fits standard collets
- 32 mm flute length and 60 mm overall for deep cuts
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Will the 6.35 mm shank fit the collet on my older CNC router?
The shank diameter is 6.35 mm, which matches standard 1/4 inch collets found on many legacy CNC routers and handheld trim routers.
How can I verify the up-cut and down-cut geometry is cutting cleanly on plywood?
Inspect the top and bottom faces of the plywood after a test pass; both surfaces should show minimal tear-out if the compression geometry is working correctly.
Does the single independent package contain all five 60 mm long cutters or must I order additional pieces?
The package includes five individual cutters, each 60 mm in overall length, so no extra pieces are required to complete the set.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
