YINGHUA
YINGHUA 5-piece 6×32×60 mm DLC Coat Two-Flute Up/Down Cut Spiral Carbide Mill Cutters
Set of five DLC-coated carbide spiral cutters with up/down flutes for clean compression cuts in wood and PVC
- TypeRight-Angle Drills
- DLC coating reduces friction and heat for cleaner cuts in wood and PVC
- Up-cut and down-cut geometry compresses fibres to prevent tear-out on both faces
- Tungsten steel body keeps edges sharp through repeated CNC routing passes
- Five-piece set supplies ready replacements to minimise workshop downtime
- 6 mm shank, 32 mm cut length and 60 mm overall length fit standard collets
5-Piece DLC Coated Carbide Mill Cutter Set
This set contains five 6×32×60 mm two-flute spiral cutters with an up-and-down compression geometry. They are made from tungsten steel and feature a DLC coating for wear resistance. The cutters are designed for CNC machinery and suit wood, plywood, density board, solid wood and particleboard. Industrial cutting use only; not for persons under 18 years.
Thermals Noise And Power Draw
These are passive rotary cutting tools that generate no electrical noise or power draw of their own. Heat is produced only through friction at the workpiece interface during milling. The DLC coating reduces friction and helps dissipate cutting heat into the chips. Thermal load and acoustic output depend entirely on the host CNC spindle, feed rates and material being cut.
Replaces Worn Compression Bits For Clean Edges
The set directly replaces worn or damaged up-and-down cut compression bits in a CNC tool changer. The jump is worth it when existing cutters leave fuzzy edges on double-sided laminates or when tool changes interrupt batch runs. It does not suit applications needing single-flute chip clearance, larger shank diameters or non-ferrous metal cutting geometries.
Highlights
- DLC coating reduces friction and heat for cleaner cuts in wood and PVC
- Up-cut and down-cut geometry compresses fibres to prevent tear-out on both faces
- Tungsten steel body keeps edges sharp through repeated CNC routing passes
- Five-piece set supplies ready replacements to minimise workshop downtime
- 6 mm shank, 32 mm cut length and 60 mm overall length fit standard collets
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How do I fit the 6 mm shank cutters into my CNC collet and what step is often missed?
Insert the 6 mm shank fully into a matching collet, tighten securely, then verify the 32 mm flute length clears the workpiece before starting the spindle.
When will the DLC coating on these tungsten-steel cutters need replacement?
Replace the cutters when the diamond-like carbon coating shows visible wear or when cut quality on wood, plywood or particleboard degrades.
What limit appears first during a long production run with the 60 mm overall length tools?
Heat buildup in the carbide body typically becomes the limiting factor before the 60 mm tool length reaches its deflection threshold.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
