YINGHUA
YINGHUA 5-piece 6×15×50 mm carbide end mill cutter set
Five-piece carbide end-mill set with up-and-down spiral flutes for clean compression cuts in wood and PVC
- TypeRight-Angle Drills
- 5-piece set covers multiple CNC jobs with one purchase
- Up-cut and down-cut flutes compress wood fibres for clean edges
- Tungsten steel construction resists wear during abrasive cutting
- 15 mm flute length handles deep grooves in solid wood and particleboard
- Suitable for wood, plywood, density board and particleboard
YINGHUA 5-piece carbide end mill set
This five-piece set contains 6×15×50 mm carbide end mills designed for CNC routing. The two-flute up-and-down spiral geometry produces a compression cut that reduces tear-out on both faces of the workpiece. They are intended for wood, plywood, density board, solid wood and particleboard.
Check shank size and machine compatibility
Verify that your CNC spindle or router accepts a 6 mm shank before ordering. The cutters are rated for industrial cutting only and must not be used by anyone under 18 years of age. Ensure your work-holding and dust-extraction setup suits the materials you plan to machine.
Carbide construction manages heat during cutting
Tungsten steel carbide resists heat build-up better than high-speed steel when profiling dense sheet goods. The up-and-down flute design helps evacuate chips, which keeps the cutting zone cooler and reduces motor load. Normal operation produces typical router noise levels for the material being cut.
Highlights
- 5-piece set covers multiple CNC jobs with one purchase
- Up-cut and down-cut flutes compress wood fibres for clean edges
- Tungsten steel construction resists wear during abrasive cutting
- 15 mm flute length handles deep grooves in solid wood and particleboard
- Suitable for wood, plywood, density board and particleboard
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What comes in the box and do I need a collet or holder separately?
The package contains five individual 6×15×50 mm two-flute up-and-down spiral carbide end mills; a 6 mm collet or compatible tool holder for your CNC spindle must be sourced separately.
How do I choose between the cutters in this 5-piece set?
All five cutters are identical 6×15×50 mm two-flute compression bits, so there is no version choice — buy the set when you need multiple fresh edges for the same wood or PVC jobs.
What does the 15 mm flute length mean when the bit is in my CNC router?
It gives a 15 mm maximum depth of cut per pass in wood, plywood, density board or particleboard before the shank contacts the workpiece.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
