YINGHUA
YINGHUA 5-piece 5x17x50mm Two-Flute UP/DOWN Cut Carbide Mill Cutters
Five carbide mill cutters with up/down flutes for compression cutting of wood and PVC
- TypeRight-Angle Drills
- Five-piece carbide set covers multiple routing tasks
- Two-flute up/down spiral geometry gives clean edges on both faces
- Tungsten-steel construction resists wear in abrasive sheet goods
- 5×17×50 mm shank fits standard CNC collets
- Suitable for wood, plywood, density board, solid wood and particleboard
Five-piece carbide milling set
This five-piece set provides tungsten steel milling cutters for CNC machinery. Each cutter measures 5x17x50mm and features two flutes with an up-and-down spiral geometry. The compression design suits wood, plywood, density board, solid wood and particleboard. Industrial users gain a precise cutting experience with these replacement tools.
Compression geometry for clean edges
The up-and-down flute configuration compresses material from both sides to reduce tear-out on top and bottom surfaces. This works well for double-sided laminates and veneered boards where edge quality matters. Cutting depth is limited by the 17mm flute length and 50mm overall length. Harder materials or high-volume production will wear the tungsten steel faster than dedicated industrial grades.
5mm shank diameter fits compatible collets
The 5mm shank determines which CNC routers or spindle motors accept these cutters. Machines requiring 6mm, 8mm or 1/4-inch collets cannot use this set without an adapter. Buyers needing larger shank diameters or extended reach for deeper pockets must select different tooling. The 18-year age restriction also limits use to adult operators in industrial settings.
Highlights
- Five-piece carbide set covers multiple routing tasks
- Two-flute up/down spiral geometry gives clean edges on both faces
- Tungsten-steel construction resists wear in abrasive sheet goods
- 5×17×50 mm shank fits standard CNC collets
- Suitable for wood, plywood, density board, solid wood and particleboard
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Will the 5 mm shank fit my older collet?
Each cutter has a 5 mm shank diameter, so it fits any collet or chuck that accepts 5 mm shanks.
How can I confirm the up-cut and down-cut action is working after installation?
Run a test cut in scrap wood or PVC; clean edges on both the top and bottom surfaces show the compression geometry is cutting correctly.
Does the box include five separate cutters or one multi-flute tool?
The package contains five individual 5 x 17 x 50 mm two-flute up/down compression cutters, each in its own sleeve.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
