YINGHUA
YINGHUA 5-piece 5×22×50 mm two-flute up-down carbide mill cutter set
Five-piece tungsten-steel carbide mill cutter set with up-down spiral flutes for clean compression cuts in wood and PVC
- TypeRight-Angle Drills
- Five cutters give spare tools for continuous work
- 5×22×50 mm size fits standard collets and tool changers
- Two-flute up-down geometry shears top and bottom faces cleanly
- Tungsten steel body keeps edges sharp in wood and PVC
- Rated for users aged 18 and above for industrial cutting only
Five-piece carbide mill cutter set
This five-piece set contains up-down spiral carbide mill cutters sized 5×22×50 mm. Each cutter has two flutes and is made from tungsten steel. The bits are designed for compression cutting in wood, plywood, density board, solid wood and particleboard using CNC machinery.
For CNC wood and plastic cutting.
These cutters suit operators running CNC routers who need clean edges on sheet goods and solid timber. They are not intended for hand-held drilling or routing. Buyers needing single cutters, different diameters or longer cutting lengths should look at other options.
5×22×50 mm two-flute up-down geometry
The critical specification is the 5 mm shank diameter combined with a 22 mm cutting length and 50 mm overall length in a two-flute up-down spiral. This geometry determines whether the tool fits your collet and clears the workpiece thickness in a single pass.
Highlights
- Five cutters give spare tools for continuous work
- 5×22×50 mm size fits standard collets and tool changers
- Two-flute up-down geometry shears top and bottom faces cleanly
- Tungsten steel body keeps edges sharp in wood and PVC
- Rated for users aged 18 and above for industrial cutting only
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
When will the 5 mm tungsten-steel cutters need replacing?
Replace them when the up-down spiral edges no longer shear wood, plywood or particleboard cleanly; lifespan depends on feed rate and material density.
What limits continuous cutting with the 22 mm flute length?
Chip evacuation in deep slots and heat build-up in the tungsten steel body are the first constraints during extended runs.
How much noise and heat do the 50 mm shank cutters generate all day?
Expect typical high-speed router noise and moderate heat at the cutting zone; no forced cooling is built into the solid carbide design.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
