YINGHUA
YINGHUA 5-piece 3.175x17x38mm UP/DOWN Cut Carbide Mill Cutter Set
Five-piece carbide cutter set with up/down spiral flutes for clean compression cuts in wood, plywood and particleboard
- TypeRight-Angle Drills
- 5-piece set covers multiple CNC jobs in one purchase
- Up/down spiral flutes compress material for cleaner edges on wood and PVC
- 175 mm shank fits standard 1/8 in collets
- 17 mm flute length handles typical board thicknesses
- Tungsten-steel carbide resists wear for longer tool life
Five-piece carbide milling cutter set
This set contains five 3.175 mm shank carbide end mills with a 17 mm cutting length and 38 mm overall length. Each cutter uses a two-flute up-and-down spiral geometry designed for compression cutting. The tools are made from tungsten steel and are supplied new in individual packaging.
Up-and-down compression geometry
The opposing flute directions push chips both upward and downward, which reduces tear-out on the top and bottom faces of the workpiece. This behaviour improves edge quality when cutting wood, plywood, density board, solid wood and particleboard. The five-piece quantity provides spare cutters for extended production runs.
For CNC operators cutting sheet goods
The 3.175 mm shank fits collets and tool holders that accept that specific diameter. The cutters are intended for industrial cutting on CNC machinery and are not for use by anyone under 18 years of age. Buyers who need a different shank diameter, longer cutting length or a single-flute design should look at other tooling.
Highlights
- 5-piece set covers multiple CNC jobs in one purchase
- Up/down spiral flutes compress material for cleaner edges on wood and PVC
- 175 mm shank fits standard 1/8 in collets
- 17 mm flute length handles typical board thicknesses
- Tungsten-steel carbide resists wear for longer tool life
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How often will the 3.175 mm carbide cutters need resharpening when cutting plywood daily?
Resharpening interval depends on feed rate and material density; inspect the two-flute edges after every few hours of continuous plywood routing and touch up when edge wear becomes visible.
What limits continuous run time on a CNC spindle using these 17 mm flute-length bits?
Heat buildup in the tungsten-steel body is the first limit; allow the spindle to cool after prolonged heavy cuts in solid wood to prevent premature dulling.
How much noise and heat do the up/down cutters generate during all-day operation?
The compression geometry reduces tear-out but increases cutting force, so expect higher spindle load and noticeable router whine; use dust extraction to manage heat at the 38 mm overall length.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
