YINGHUA
YINGHUA 5-piece 10x42x90mm two-flute up-down carbide end mill cutters
Set of five 10 mm two-flute up-down spiral carbide end mills for compression cutting wood and PVC
- TypeRight-Angle Drills
- Five-piece set covers multiple CNC jobs
- 10 mm shank fits standard collets
- Up-down spiral gives clean compression cuts
- Tungsten-steel body resists wear in wood and PVC
- Right-angle drill format suits tight workspaces
5-piece 10×42×90 mm carbide set
This set contains five two-flute up-and-down cut spiral carbide end mills measuring 10 mm in diameter with a 42 mm cutting length and 90 mm overall length. The cutters are made from tungsten steel and are designed for compression milling in wood, plywood, density board, solid wood and particleboard. Each cutter is individually packaged.
CNC operators cutting wood and composites
The up-and-down flute geometry gives clean edges on both faces of the workpiece, making these bits suitable for CNC routing of wood-based panels and PVC. They are not intended for metal, stone or glass, and the supplier specifies that the bladed product must not be used by anyone under 18 years of age. Buyers needing cutters for ferrous or non-ferrous metals should look elsewhere.
Five cutters for medium-depth profiling
With a 42 mm flute length the tools handle grooves, dados and through-cuts up to that depth in a single pass. The 90 mm overall length fits standard ER collets and tool holders found on many hobby and light-industrial CNC routers. For deeper pockets or heavier stock removal in a single pass, longer-flute or larger-diameter tooling would be required.
Highlights
- Five-piece set covers multiple CNC jobs
- 10 mm shank fits standard collets
- Up-down spiral gives clean compression cuts
- Tungsten-steel body resists wear in wood and PVC
- Right-angle drill format suits tight workspaces
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What shank diameter must my CNC collet or router accept for these 10 mm cutters?
The cutters have a 10 mm shank, so your machine needs a 10 mm collet or chuck.
Will these up-down spiral bits cut cleanly in the plywood and particleboard I already process?
Yes — they are designed for wood, plywood, density board, solid wood and particleboard.
How can I confirm the up-down geometry is working after the first test cut?
Check that both the top and bottom faces of the workpiece show clean edges without tear-out.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
