YINGHUA
YINGHUA 5 pcs 6X22 Blue Nano UP DOWN Cut Carbide Mill Cutter Bits
Five-piece tungsten-steel carbide set with 6×22 mm up-down spiral flutes cuts wood, plywood and particleboard cleanly on CNC routers
- TypeRight-Angle Drills
- Tungsten steel construction delivers precise, easy cutting
- Up-down spiral compression reduces splintering on both faces
- One-flute design clears chips efficiently in wood
- Five-piece set covers multiple CNC milling jobs
- Suitable for plywood, density board and solid wood
Tungsten Steel CNC Cutter Set
This five-piece set contains carbide milling cutters with a 6 x 22 millimetre profile and a blue nano coating. The single-flute up-down spiral design is made from tungsten steel for CNC machinery. It is intended for precise cutting of wood, plywood, density board, solid wood and particleboard. The product is new and supplied as a pack of five cutters.
Woodworkers Needing Compression Bits
These bits suit CNC operators and woodworkers who require clean edges on both faces of sheet materials such as plywood or density board. The up-down geometry reduces tear-out on the top and bottom surfaces during through-cuts. Buyers needing different shank diameters, flute counts or coatings for metals, plastics or solid-surface materials should look at other tooling options. The set is not for use by persons under 18 years of age.
6 x 22 mm Single-Flute Geometry
The critical specification is the 6 x 22 millimetre cutting profile combined with a one-flute up-down spiral. This determines the chip-load, feed-rate window and finish quality achievable on the listed wood-based materials. Matching this exact geometry to your machine’s collet and the workpiece thickness decides whether the cutter will perform as intended.
Highlights
- Tungsten steel construction delivers precise, easy cutting
- Up-down spiral compression reduces splintering on both faces
- One-flute design clears chips efficiently in wood
- Five-piece set covers multiple CNC milling jobs
- Suitable for plywood, density board and solid wood
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How can I verify the up-down cut carbide bits are cutting cleanly after installing them in my CNC machine?
Inspect the edges of the wood, plywood, density board, solid wood or particleboard for smooth, tear-free surfaces on both top and bottom faces.
What exactly is included in the package and do I need to purchase any collets or holders separately?
The pack contains five 6X22 Blue Nano one-flute up-down cut spiral carbide mill cutters; collets or tool holders are not included and must be sourced to match your spindle.
Which of the listed versions or capacities should I choose for cutting dense hardwoods versus softer sheet goods?
All five cutters share the same 6X22 tungsten-steel geometry and are rated for wood, plywood, density board, solid wood and particleboard, so the set covers both material types without a capacity choice.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
