YINGHUA
YINGHUA 5 pcs 3.175X17X38 Blue Nano Two Flutes UP DOWN Cut Spiral Carbide Mill Cutters
Five tungsten-steel cutters with up-and-down spiral flutes for clean CNC cuts in wood, plywood and particleboard
- TypeRight-Angle Drills
- Five cutters handle wood, plywood and particleboard
- Tungsten steel construction resists wear during CNC routing
- Up-and-down spiral design compresses chips for clean edges
- Blue nano coating reduces friction on PVC and density board
- 175 mm shank fits standard collets for precise cuts
YINGHUA 5-Piece Carbide Mill Cutter Set
This set contains five blue nano-coated carbide end mills designed for CNC routing. Each cutter measures 3.175 mm in diameter with a 17 mm cutting length and 38 mm overall length. The two-flute up-and-down spiral geometry provides compression cutting action for clean edges.
Compression Spiral Geometry for Clean Edges
The up-and-down flute design shears material fibres in opposite directions, preventing tear-out on both the top and bottom surfaces. This makes the cutters suitable for laminated sheet goods such as plywood, particleboard and density board where edge quality matters.
For CNC Operators Cutting Wood and PVC Sheets
Ideal for sign makers, cabinet shops and hobbyists running desktop or industrial CNC routers on solid wood, plywood or PVC. Not for machining ferrous metals, aluminium or abrasive composites that require specialised tool coatings or geometries.
Highlights
- Five cutters handle wood, plywood and particleboard
- Tungsten steel construction resists wear during CNC routing
- Up-and-down spiral design compresses chips for clean edges
- Blue nano coating reduces friction on PVC and density board
- 175 mm shank fits standard collets for precise cuts
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What does the 3.175 mm shank diameter mean for my CNC machine?
The 3.175 mm shank matches 1/8-inch collets common on desktop CNC routers, so the bits seat directly in standard holders without adapters.
How does the up-down flute geometry affect the cut in wood and PVC?
The two-flute up-down spiral compresses chips toward the centre, giving clean top and bottom edges on plywood, solid wood, particleboard and PVC without tear-out.
What physical space do the 38 mm overall length and 17 mm flute length need in the tool changer?
Each cutter is 38 mm long with a 17 mm cutting section, so the spindle and tool magazine must clear at least that depth for safe automatic changes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
