YINGHUA
YINGHUA 5 pcs 3.175×25×50 mm Two Flute Up-Down Carbide End Mill Cutters
Five carbide up-down spiral cutters sized 3.175×25×50 mm for clean compression cuts in wood and PVC
- TypeRight-Angle Drills
- 5-piece set covers multiple CNC jobs
- 175 mm diameter suits fine detail work
- 25 mm flute length handles standard material depth
- Up-down spiral compression cuts wood and PVC cleanly
- Tungsten steel construction resists wear in production use
Five-piece carbide cutter set
This YINGHUA set contains five tungsten-steel end mills with 3.175 mm shank diameter, 25 mm cutting length and 50 mm overall length. The two-flute up-down spiral geometry compresses the workpiece for clean edges on wood, plywood, density board, solid wood and particleboard. They are intended for CNC routing and similar industrial cutting tasks. Supplied as individual packages.
Suited for CNC operators cutting wood composites
Makers running CNC routers who need chip-free faces on laminated or solid wood will benefit from the compression flute design. The cutters are not for hand-held drilling or general-purpose twist-drill work. Buyers who need larger shank diameters, different flute counts or metal-cutting grades should look at other tooling.
3.175 mm shank diameter decides fit
This single dimension determines whether the cutters seat directly in your machine's collet or require an adapter. Verify the collet size before ordering; no other specification overrides this compatibility requirement.
Highlights
- 5-piece set covers multiple CNC jobs
- 175 mm diameter suits fine detail work
- 25 mm flute length handles standard material depth
- Up-down spiral compression cuts wood and PVC cleanly
- Tungsten steel construction resists wear in production use
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Should I choose these 3.175 mm shank cutters for my CNC machine?
These cutters have a 3.175 mm shank diameter, so they fit collets or holders sized for that dimension. Verify your machine's collet size before ordering.
What does the 25 mm flute length mean when I am cutting?
The 25 mm flute length is the cutting depth you can achieve in a single pass. It suits pockets or profiles up to that depth in wood, plywood or particleboard.
How does the up-down spiral geometry affect the cut?
The up-down flutes push chips both upward and downward, compressing the material. This reduces tear-out on both faces of wood, plywood and density board.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
