YINGHUA
YINGHUA 4X32X55mm 3A UP DOWN Compound Single Flute Spiral Carbide Mill Tool Cutters
Carbide single-flute router bit with up-cut and down-cut geometry cuts acrylic, PVC, density board and wood cleanly
- TypeRight-Angle Drills
- Single-flute up-down spiral cuts wood and acrylic cleanly
- Tungsten steel body resists wear during CNC routing
- 4 mm shank fits standard collets for quick tool changes
- 32 mm flute length handles deep passes in dense board
- 55 mm overall length suits compact router setups
CNC Router Bit for Wood and Plastic
This carbide milling cutter is designed for CNC machinery and provides a precise cutting experience. It is intended for industrial use on materials such as acrylic, PVC, density board, and wood board. The tool is restricted to users aged 18 and over.
Up-Down Compound Single Flute Geometry
The cutter features an up-down compound spiral with a single flute configuration. This geometry is the primary factor determining cut quality and chip evacuation for the listed materials. Select this bit when that specific flute design matches your routing requirements.
4 mm Diameter with 32 mm Cutting Length
The 4 mm shank diameter and 32 mm cutting length define the tool's reach and material removal capacity per pass. It handles standard sheet thicknesses in the stated materials but runs out on deeper profiles or larger diameter routing paths.
Highlights
- Single-flute up-down spiral cuts wood and acrylic cleanly
- Tungsten steel body resists wear during CNC routing
- 4 mm shank fits standard collets for quick tool changes
- 32 mm flute length handles deep passes in dense board
- 55 mm overall length suits compact router setups
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What does the 32 mm flute length allow when routing?
The 32 mm flute gives up to 32 mm of cutting depth in a single pass, suitable for acrylic, PVC, density board and wood board.
What shank size does the 4 mm figure refer to and what collet is needed?
The 4 mm dimension is the shank diameter, so a 4 mm ER collet or compatible chuck is required for CNC routers.
Will the 55 mm overall length fit my machine’s tool changer clearance?
At 55 mm total length the cutter fits most standard CNC routers, but verify your spindle’s maximum tool length before purchase.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
