YINGHUA
YINGHUA 4X22X45MM DLC Coat Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutters 5 pieces
Five DLC-coated carbide cutters with up-and-down spiral flutes compress wood and PVC for clean edges on CNC routers
- TypeRight-Angle Drills
- DLC coating reduces friction for smoother cuts in wood and PVC
- Up-and-down flute geometry compresses material to prevent tear-out on both faces
- Tungsten-steel construction resists wear for longer tool life
- Five-piece set provides ready spares for continuous CNC operation
- 4 mm shank fits standard collets for quick tool changes
Precision CNC Cutting Set
This five-piece set comprises 4 mm by 22 mm by 45 mm carbide end mills with a diamond-like carbon coating. The up-and-down flute geometry produces clean edges on both faces of the workpiece in a single pass. They are intended for CNC routing and milling operations on wood-based sheet goods and rigid plastics.
Makers routing sheet goods
Woodworkers and sign makers cutting plywood, MDF, particleboard or solid wood will benefit from the compression spiral that reduces tear-out on the top and bottom surfaces. The cutters are also rated for PVC and similar plastics. Buyers who need to machine aluminium, steel or other metals should select tooling designed for those materials.
22 mm flute length
The cutting portion measures 22 mm, which determines the maximum depth of cut in a single pass. Deeper pockets or through-cuts in thicker stock will require multiple passes or a longer-flute tool. The 45 mm overall length and 4 mm shank must match the collet and tool-holder capacity of the machine.
Highlights
- DLC coating reduces friction for smoother cuts in wood and PVC
- Up-and-down flute geometry compresses material to prevent tear-out on both faces
- Tungsten-steel construction resists wear for longer tool life
- Five-piece set provides ready spares for continuous CNC operation
- 4 mm shank fits standard collets for quick tool changes
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What CNC machine shank size matches the 4 mm diameter of these cutters?
These cutters have a 4 mm shank, so the CNC collet or chuck must accept a 4 mm tool shank for secure clamping.
Will the up-and-down flute geometry cut cleanly in the plywood and particleboard I already process?
The up-and-down spiral design compresses material from both sides, reducing tear-out on plywood, particleboard and solid wood.
How can I confirm the DLC coating is performing after the first job?
Inspect the cutting edges for minimal wear and check that the workpiece surfaces show clean, burn-free cuts in wood and PVC.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
