YINGHUA
YINGHUA 4X22X45MM BlueNano Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutters
Five-piece tungsten-steel set with up-and-down flutes for clean compression cuts in wood and PVC
- TypeRight-Angle Drills
- Precise cuts with up-and-down spiral flutes
- Clean edges in wood and PVC from compression geometry
- Long tool life from tungsten steel construction
- Ready for CNC machinery as direct replacements
- Industrial cutting use only, age 18+ required
YINGHUA 4X22X45MM BlueNano Cutters
This set contains five carbide end mill cutters designed for CNC routing applications. The BlueNano coating and tungsten steel construction provide durability for industrial cutting tasks. They are intended for users aged 18 and over operating compatible machinery. Each cutter is individually packaged for protection.
Two Flute Up and Down Spiral Geometry
The up and down cut spiral design compresses material fibres during routing to reduce tear-out on both faces of the workpiece. This geometry suits compression cutting of wood, plywood, density board, solid wood and particleboard. The 22 mm cutting length defines the maximum depth per pass in a single operation. Right-angle drill compatibility is required for proper fitment.
4 mm Shank Diameter and 45 mm Overall Length
The 4 mm shank fits standard collets and tool holders sized for that diameter. The 45 mm overall length provides reach for shallow to medium pocketing operations. Tungsten steel construction maintains edge hardness in abrasive composite boards. The set covers multiple identical replacements for continuous production runs without tool changes.
Highlights
- Precise cuts with up-and-down spiral flutes
- Clean edges in wood and PVC from compression geometry
- Long tool life from tungsten steel construction
- Ready for CNC machinery as direct replacements
- Industrial cutting use only, age 18+ required
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Which pack size should I choose for this 4X22X45MM BlueNano carbide mill cutter set?
The set contains five pieces of 4X22X45MM two-flute up-and-down cut spiral cutters, so one pack gives you five identical cutters for wood and PVC work.
How does the 45 mm overall length perform in a CNC router when cutting solid wood?
The 45 mm length provides enough reach for typical plywood, density board and solid wood stock while the compression geometry shears both faces cleanly in a single pass.
What shank interface does the 4 mm diameter cutter use and what materials can it cut?
The 4 mm shank fits standard collets and the tungsten-steel cutters are designed for wood, plywood, density board, solid wood, particleboard and PVC.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
