YINGHUA
YINGHUA 4X17 DLC Coat One Flute Up Down Cut Carbide Mill Cutters 5pcs
Five-piece set of 4 mm DLC-coated up-down cut carbide mill cutters for compression cutting of wood, plywood and particleboard
- TypeRight-Angle Drills
- 5-piece carbide mill cutter set for CNC woodworking
- DLC coating on tungsten steel extends tool life
- One-flute up-down spiral geometry for clean compression cuts
- Suitable for wood, plywood, density board and particleboard
- Industrial-grade cutting bits, not for users under 18
5-Piece DLC-Coated Carbide Mill Cutters
This set contains five 4X17 tungsten-steel cutters with a single flute and an up-down spiral geometry. The DLC coating reduces friction and extends edge life when machining wood, plywood, density board, solid wood and particleboard. They are intended for CNC machinery and are sold new. The product is restricted to users aged 18 and over.
Single-Flute Up-Down Spiral Geometry
The one-flute design evacuates chips in both directions, which limits tear-out on the top and bottom faces of the workpiece. Cutting performance depends on the spindle speed and feed rate available on your CNC router; the tool itself does not alter those machine limits. No coolant system is integrated, so dust extraction must be provided by the workshop setup.
Shank Diameter and Machine Compatibility
Verify that your CNC collet or tool holder accepts the 4 mm shank implied by the 4X17 designation before ordering. Confirm that the 17 mm cutting length suits the material thickness you plan to process. Ensure your machine’s Z-axis travel and rigidity can accommodate the tool without excessive deflection.
Highlights
- 5-piece carbide mill cutter set for CNC woodworking
- DLC coating on tungsten steel extends tool life
- One-flute up-down spiral geometry for clean compression cuts
- Suitable for wood, plywood, density board and particleboard
- Industrial-grade cutting bits, not for users under 18
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How do I pick the right cutter from the 5-piece set?
All five cutters share the same 4X17 DLC-coated one-flute up-down spiral geometry, so any one of them will suit the listed wood and board materials.
What does the 4X17 specification tell me about cutting performance?
The 4 mm cutting diameter and 17 mm flute length give a narrow, deep profile that clears chips efficiently in plywood, density board, solid wood and particleboard.
What shank interface do these cutters use and what does it limit?
Each cutter has a 4 mm shank designed for standard collet holders, limiting use to spindles or routers that accept that shank size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
