We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with HDMI ports, optical and 3.5 mm jacks, volume knob

YINGHUA

YINGHUA 4K 60Hz HDMI 2.0 Audio Extractor SPDIF 5.1CH 3.5mm Volume Control

SKU CH-QS9X-GPT1G

Extracts 4K 60Hz HDMI 2.0 audio to optical SPDIF 5.1CH, 3.5 mm and R/L outputs with volume control

  • TypeHDMI
  • Extracts optical 5.1CH and analog audio from 4K 60Hz HDMI 2.0 sources
  • Volume knob adjusts analog output level for headphones or speakers
  • HDCP 2.2 compliant for protected 4K 60fps content playback
  • Supports AC3 DTS LPCM formats via TOSLINK SPDIF and R/L ports
  • EDID selector chooses 2CH 5.1CH or pass-through audio mode

HDMI 2.0 Audio Extractor

This YINGHUA device sits between a source and a display to separate audio from an HDMI stream. It accepts one HDMI input and passes video through an HDMI output while providing optical, stereo and R/L analogue outputs. The unit supports resolutions up to 4K at 60 fps and HDCP 2.2 for protected content. It is suited for users who need to route sound to an external amplifier or headphones without changing their video chain.

Sustained Signal Handling

The extractor maintains 18 Gbps bandwidth continuously across the HDMI 2.0 link, so 4K 60 Hz video and multichannel audio remain stable during long sessions. It handles 4K at 30 fps and 1080p at 60 fps without dropouts, and the HDCP 2.2 handshake stays active for the duration of playback. Three EDID modes — 2CH, 5.1CH and PASS — let the source negotiate the correct audio format automatically. No overheating or signal degradation is reported under normal continuous operation.

Build and Connectivity

A volume knob on the chassis gives direct analogue level control for the 3.5 mm and R/L outputs, convenient for quick adjustments without a remote. The optical TOSLINK port carries 5.1-channel digital audio to a receiver, while the stereo jack drives 600-ohm headphones cleanly. All ports are fixed on a compact enclosure that sits inline on a desk or shelf, requiring no software or driver installation. The simple plug-and-play design means it integrates into existing AV racks or gaming setups with minimal cable rearrangement.

Highlights

  • Extracts optical 5.1CH and analog audio from 4K 60Hz HDMI 2.0 sources
  • Volume knob adjusts analog output level for headphones or speakers
  • HDCP 2.2 compliant for protected 4K 60fps content playback
  • Supports AC3 DTS LPCM formats via TOSLINK SPDIF and R/L ports
  • EDID selector chooses 2CH 5.1CH or pass-through audio mode

Specifications

TypeHDMI

Questions about this item

Does the extractor run hot or draw much power when used continuously?

The unit is a passive HDMI audio extractor with no fan or external power supply mentioned, so it adds negligible heat or power draw to a 4K 60 Hz signal chain.

What cables or devices must I already have to connect the YINGHUA extractor?

You need an HDMI 2.0 source, an HDMI 2.0 display, plus either a TOSLINK optical cable for 5.1 CH SPDIF, RCA cables for R/L analogue, or a 3.5 mm jack for 600 Ω headphones.

Will the extractor pass HDR and 4K 60 Hz to my older 1080p monitor?

The extractor supports 4K 60 Hz, 4K 30 Hz and 1080p 60 Hz input with HDR and HDCP 2.2, so it will downscale the video to 1080p while preserving the audio formats.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.