YINGHUA
YINGHUA 3.175X2X17X38 Two Flutes Straight Slot End Mill
A two-flute carbide end mill for CNC engraving and cutting wood, acrylic, PVC, nylon and resin, with a 3.175 mm shank, 2 mm cutting diameter, 17 mm flute length and 38 mm overall length
- TypeRight-Angle Drills
- Two-flute design enables smooth chip removal during engraving
- Tungsten steel construction resists wear for longer tool life
- 175 mm shank fits standard CNC collets precisely
- 17 mm flute length suits shallow profiling and detail cuts
- Suitable for acrylic, PVC, wood and similar non-ferrous materials
YINGHUA Two-Flute Carbide End Mill
The YINGHUA 3.175X2X17X38 is a new tungsten-steel milling cutter with two straight flutes, built for CNC engraving and fine cutting of acrylic, PVC, nylon, resin, wood and plywood. It is intended for operators aged 18 and over using industrial CNC machinery.
Sustained Cutting Behaviour
Tungsten steel construction maintains edge geometry during continuous passes, reducing deflection when profiling the listed materials at the cutter's 17 mm flute length and 38 mm overall length. The two-flute design clears chips efficiently in wood and plastics, helping to prevent heat buildup during extended toolpaths.
Shank and Toolholder Limits
The 3.175 mm shank diameter fits collets and holders made for that size; it will not seat in larger or smaller bores without an adapter. Maximum engagement is limited by the 17 mm cutting length, so workpieces and fixtures must allow full flute clearance without bottoming out the 38 mm tool body.
Highlights
- Two-flute design enables smooth chip removal during engraving
- Tungsten steel construction resists wear for longer tool life
- 175 mm shank fits standard CNC collets precisely
- 17 mm flute length suits shallow profiling and detail cuts
- Suitable for acrylic, PVC, wood and similar non-ferrous materials
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How much heat does the 3.175 mm shank generate during all-day CNC engraving?
Tungsten steel construction dissipates heat efficiently, keeping the 3.175 mm shank stable during continuous wood, acrylic or PVC cutting sessions.
What collet size must my CNC router already have to hold this 3.175 mm shank?
Your machine needs a 3.175 mm (1/8 inch) ER collet or chuck to secure the 3.175 mm shank on this two-flute end mill.
Will the 17 mm cutting length reach through the 18 mm plywood sheets I keep in stock?
The 17 mm flute length falls just short of 18 mm plywood, so plan for a two-pass cut or thinner material.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
